Rendering the trough…
3D Blender plant →
Ruth plot: t/v against v
Straight line: slope = μαc/2ΔP, intercept = μRm/ΔP. Dots are RK4 data; ring = end of formation.
Cake thickness around one revolution
Green band: 2 to 25 mm window that releases cleanly. Blue: formation. Dashed: knife.
Dry solids map: speed n against ψ
Brighter = more t/h. Hatched = thin (< 2 mm) or cracking (> 25 mm). Tap to move the operating point.

💧 Drum filter controls

Operating point

Revolution time
Formation time tf
Filtrate per area v
Cake thickness
Cake resistance / medium
Filtrate rate
Dry solids
The science

Ruth equation (constant pressure, v = filtrate per unit area): dv/dt = ΔP / [μ (α c v + Rm)], solved as t = (μαc/2ΔP) v² + (μRm/ΔP) v. Plotting t/v against v gives a straight line, the standard lab test for α and Rm. Each patch of cloth filters only while submerged, tf = ψ · 60/n; throughput is Q = πDL · v · n/60; cake thickness x = c v/(ρs(1−ε)).

Reading the map. Without medium resistance Q grows as √n and as ΔP(1−s)/2. Faster drums give thinner cake; the thin hatched region is where the knife cannot lift it. The slow hatched region is where the cake cracks. The best operating point sits just inside the green window.

Honest simplifications. Illustrative parameters, not a specific plant. Constant porosity 0.5, one average specific resistance α = α0(ΔP/50 kPa)s, no cake washing, no moisture model, no cloth blinding, no pipework losses. The 2 mm and 25 mm limits are round numbers. The drum, trough and knife are a Blender render; the drum and cake are drawn live. Cake height is exaggerated by the slider.

Independent checks (run on load; the 3D page uses the same core):

running…
Made with 🟠 Blender