Paper Airplane Lift and Drag (3D)

A Blender park with distance posts: throw a paper plane with a real drag polar, add wind or a thermal and follow it with the camera.

Presets

Playback

Throw

Plane

Air

Camera

Layers

Quality

Model check

The science

The model: a point mass with a drag polar

The paper plane is treated as a point of mass m moving in the vertical plane with a fixed lift coefficient CL (set by how the wings are folded and trimmed). With the air-relative velocity va = v − w (wind w, thermal as vertical wz), the aerodynamic forces are L = ½ ρ va2 S CL (perpendicular to va), D = ½ ρ va2 S CD (along −va), CD = CD0 + K CL2, K = 1/(π e AR) and m dv/dt = L + D + m g, integrated with fourth-order Runge-Kutta. The quadratic drag polar is the standard first approximation: zero-lift drag from skin friction and the folds, plus lift-induced drag that grows as CL2/AR, which is why low-aspect-ratio darts glide steeply.

Steady glide, best glide and the phugoid

In an equilibrium glide, lift balances the component of weight across the path and drag balances the along-path component: tan γ = −CD/CL, so the glide ratio is L/D = CL/CD, independent of weight, and the speed is V = √(2 m g cosγ / (ρ S CL)). The best glide ratio occurs where the line from the origin is tangent to the polar, at CL* = √(CD0/K). A throw faster or slower than the equilibrium speed trades speed for height in a long oscillation, the phugoid, whose period for a clean glider is the Lanchester value T ≈ π √2 V/g; a hard throw upward at high CL can carry the plane over the top in a loop. The range graph shows how the distance depends on throw speed.

Wind and thermals

The plane responds to the air, not the ground: a headwind lowers the ground speed and shortens the range, a tailwind extends it, and rising air of speed wz larger than the sink rate V sin|γ| lets a plane climb or hold height (soaring).

The 3D model

The paper plane, the park, the distance posts, the launch stand, the trees, the school and the bench were modelled in Blender as named parts with baked textures. The plane is moved by JavaScript with the same equations as the 2D page: the red line is its path, the dotted line the prediction, small ghost planes mark every 0.25 s, and the arrows show lift, drag and weight. The plane is drawn several times larger than real size so you can see it.

Honest simplifications

(1) The attitude is not simulated: CL is a constant you choose, so there is no stall, no pitching oscillation and no instability; real paper planes need correct trim (centre of gravity and the elevator folds) to behave like this. (2) Drag and lift coefficients are constants although the Reynolds number of a paper plane (about 104) changes them. (3) The wind is uniform; there are no gusts or ground effect. (4) Throw geometry is a point release. The drawn plane is enlarged for visibility.

Model checks in this page

(1) launched at the equilibrium speed and angle, the simulated distance per metre of height lost equals CL/CD; (2) the simulated phugoid period of a clean glider matches Lanchester's π√2 V/g; (3) with no drag the total energy ½v2 + g z is conserved.

Loading model...
Loading Blender model...
Airspeed along the flight against the steady-glide speed
Kinetic, potential and total energy per kilogram
Drag polar with the best-glide tangent
Range against throw speed (sweep)
Made with 🟠 Blender · Three.js