loading...
running...
How to use
Watch the marble release, roll, loop and fly. Try: (1) Just completes loop versus Falls off the loop: the critical height is 2.7 loop radii; (2) Hollow shell versus Frictionless slider: the same height gives different speeds because of the energy stored in rotation, while mass never matters; (3) raise rolling resistance and see the red "lost" energy grow; (4) change the launch angle and the cup distance to hit the cup; (5) the right-hand graph shows how the loop-top speed grows with release height. Any slider restarts the run. Space pauses, R restarts.
The 3D page builds the same track on a Blender workshop bench: the bench, tools, glass marble, start gate, target cup and shelves are Blender 5.2 models with baked PBR textures; the rails and supports are generated from your sliders so the track always matches the physics. Drag to orbit, wheel to zoom, use the camera buttons for preset views.
The science
What this lab shows. A marble released from rest rolls down a ramp, through a vertical loop, along a flat run-out and off a launch ramp into the air. Momentum and energy tell the whole story, and the marble's mass cancels out of every result.
1. Energy with rolling. A ball that rolls without slipping carries kinetic energy of translation and of rotation. With I = k m r² (k = 2/5 for a solid sphere, 2/3 for a thin shell, 0 if it slides without friction) and v = ω r:
m g h = ½ m v² + ½ I ω² = ½ (1 + k) m v² ⇒ v = √(2 g h / (1 + k))
A solid ball therefore reaches only 85 % of the speed of a frictionless slider released at the same height, and a hollow shell only 77 %. The equation of motion along the track at tangent angle φ is (1 + k) dv/dt = -g sinφ - μr N/m.
2. The loop. On a loop of radius ρ (the path of the marble's centre) the normal force per unit mass at angle ψ from the bottom is
N/m = v²/ρ + g cosψ
The marble stays on the track only while N ≥ 0. At the top (ψ = π) that needs v² ≥ g ρ; combined with energy conservation this gives the critical release height
hmin = ρ (2 + (1 + k)/2) (2.7 ρ for a solid ball, 2.5 ρ for a slider)
The right-hand graph shows the speed at the top of the loop against release height; the red line is √(g ρ).
3. Rolling resistance. Modelled as a deceleration μr N/m opposing the motion, with N the same normal force as above, so resistance is larger in the loop and on the fillets. The energy plot shows the lost energy growing.
4. Flight. After the launch ramp the marble is a projectile: x = vx (vy + √(vy² + 2 g Δy)) / g for a drop Δy to the floor. Air drag is ignored (the marble is slow and heavy).
Checks (run in the page). (1) the speed on the flat equals √(2gh/(1+k)) for a solid ball and for a slider; (2) bisection on the release height finds the loop threshold 2.7 ρ (solid) and 2.5 ρ (slider); (3) the integrated landing position equals the closed-form projectile range.
Simplifications. The marble moves in the vertical plane as a point mass with rolling inertia; real marble runs use two rails and a helical loop offset, and the marble can slip, wobble or skip over joints. Rolling resistance is a single constant coefficient. The loop detachment test ignores the finite marble radius on the rails.