MySimulator · Science film
SEED 638271 · 60 SECONDS
The science · equations & assumptions
Torque = force × perpendicular distance
Frequired = (m × g × dload) ÷ dpush
Model: a rigid, level beam around a fixed pivot. The load force is m × g; the effort torque is F × d.
Assumptions: ideal lever, no friction, no beam mass, vertical forces, and distances measured perpendicular to the forces.
Honest simplification: the film compares torques quasi-statically. Its beam tilt is an illustrative cue, not a full rigid-body simulation. Real lifting also depends on motion, friction, deformation, and energy losses.
Units: force in newtons (N), distance in metres (m), torque in newton-metres (N·m), mass in kilograms (kg). g = 9.81 m/s².
Mechanical advantage: effort arm ÷ load arm for this ideal geometry.
Live model · ideal leverLifts
Can a small push lift something much heavier?
Reduced-motion mode · use Next act or the timeline to step through the film.
Try it yourself
Change the same ideal lever model. The load arm stays fixed at 0.40 m.
Lifts. Adjust a slider to explore the torque balance.
FILM
0.0 / 60 s