Preparing WebGL scene…
0.00 m height 0.00 m/s speed 0 bounces
LIVE PHYSICS
Drag to orbit · Scroll to zoom
Switch to 2D

Soft rubber · 0.25 kgLast impact —

Impact speed sqrt(2 g h)-
Fall time-
Next apex h e^2-
Energy kept per bounce-
Bounces until rest-
Time until rest-
Last apex, measured-
Independent checks
The science

Impact. A ball dropped from height h reaches the floor with v = sqrt(2 g h) after t = sqrt(2 h / g). The coefficient of restitution e = v_out / v_in is the ratio of rebound speed to impact speed, so each bounce keeps e^2 of the kinetic energy and the apex falls as h_n = h e^(2n).

The infinite bounce sequence is finite in time. Flight n lasts 2 e^n v0 / g, a geometric series; adding them all gives t_total = t0 (1 + e) / (1 - e). A superball (e = 0.92) bounces for about 24 times the fall time, a bowling ball (e = 0.2) for 1.5 times. The engine treats an impact slower than 0.26 m/s as resting.

Air and floor. Air resistance is a simple damping v -> v exp(-k t) (k from the ball preset), so the measured apex is a little lower than the ideal one. Friction at the floor removes part of the sideways speed on every landing and then slows a rolling ball. The squash of the ball is a visual effect.

Honest simplifications: the restitution is held constant (a real ball has e that falls with impact speed and depends on pressure and temperature), there is no spin-dependent bounce or Magnus force, the drag is linear rather than quadratic, and the walls are simple reflectors. The ball presets are typical round numbers, not measurements of a specific product.

Made with 🟠 Blender · Three.js