Loading 3D scene...

Centre of Gravity and Balance

Quality:
The science

A body stays in equilibrium while its centre of mass lies above its support. Only the horizontal position of the CoM matters for the torque about the support: M g ucm.

Walker. Wire = a single support point, so the system is an inverted pendulum: Iφ'' = M g ucm(φ, θ, s) - bφ' with three masses (legs 22 kg, torso+head 38 kg, pole 1.6 kg/m), I about the wire from the parallel-axis theorem, torso lean θ and the pole slid a distance s through the hands. Uncontrolled it grows as eλt with λ = √(M g hcm / I), about 0.4 s per e-fold: far faster than a person reacts, which is why walkers carry long poles (large I, small λ) and keep correcting.

The balance reflex moves the pole: s = FF·sreq(θ) - kpφ - kdφ' - ki∫φ. A pole mass mp moved by s gives a corrective torque mp g s, so the reflex can only work if kp > M hcm / mp and if the lean does not need more than the available ±smax (the "reserve" readout: sreq = -(mtdt + mpdp) sinθ / mp).

Blocks. C stays on B while its CoM is over B (|shift| < w/2 = 60 cm). B + C stay on A while their combined CoM is over A: (mBxB + mCxC)/(mB + mC) < w/2. With equal masses the limits are 60 cm for C and 30 cm for B: the first two terms of the harmonic stack (1/2, 1/4, ...). A tipping block rotates about the edge, α'' = m g x'/Ipivot.

The checks compare the inertia with a point-mass sum, the fall with its analytic exponential, the reflex threshold by bisection, the settled pole shift with the formula, the overhang limits with closed forms and the energy of a tipping slab.

Simplifications: planar motion (a tilt about the wire), rigid segments with fixed hip-to-hand geometry, the pole kept level and treated as a point mass at the hands plus a rod inertia, a PID reflex with a 75 % posture feed-forward and no reaction delay, damping b = 15 N m s illustrative, no wire flex. Blocks are 2D slabs: no sliding, no impact, no friction limit; after tipping they simply fall.

Running numerical checks...

Made with 🟠 Blender · Three.js