Loading 2D scene...

Frozen Lake: why ice forms on top

Water:
Day:
Ice:
Surface water: , bottom:
Warmest layer:
First ice:
Heat given to the air:
Quality:
The science

Why ice floats on top. Most liquids keep getting denser as they cool, so the cold part sinks. Water is different: its density peaks at about 3.98 °C (ρ = 999.975 kg/m³), and below that it expands again. As the surface cools from, say, 12 °C, the chilled water is denser and sinks, so the whole lake overturns until every layer reaches about 4 °C. After that the surface water gets lighter as it cools further, stays on top, reaches 0 °C and freezes. Ice (917 kg/m³) is lighter than 0 °C water (999.84), so the sheet floats with about 8.3 % of its thickness above the waterline.

The model (1-D column, per square metre).

Simplifications, stated honestly. No snow cover (snow can halve ice growth), no solar radiation, no wind mixing or inflows, no ice-sheet cracking or bubbles, the lake keeps a constant depth and the ice is not allowed to change the water level. Air temperature is held at the slider value (real weather varies by the hour). Fish are drawn at the warmest layer to illustrate that many fish overwinter in the deeper, 4 °C water; their positions are schematic. Parameter values are typical but illustrative; the model is a teaching tool, not a forecast for any real lake.

Running numerical checks...

Made with 🟠 Blender