INTERACTIVE DIGITAL TWIN / RENEWABLE ENERGY

Inside a Pumped-Storage
Hydropower Plant

Follow the water. Explore the machinery. Discover how a reversible hydroelectric plant turns elevation into grid-scale energy storage.

3D Engineering ModelLive Energy PhysicsTwo Operating Modes
EXPLORE THE SYSTEM
01 / 04
A hands-on journey through water, motion and stored energy.
01 / LIVE 3D LAB

Explore the power station

RUNNING/INITIALISING
HYDRO-ELECTRIC SYSTEMLIVE 3D MODEL
Preparing interactive modelStarting graphics renderer and engineering scene…
Drag to orbit · Scroll to zoom · Click a component to inspect
ELECTRICAL POWER18.3 MWElectrical power delivered
HYDRAULIC POWER20.5 MWBefore conversion losses
IDEALISED PRESSURE8.83 barρgh, gauge pressure estimate
PIPE VELOCITY1.22 m/sAssumes a 5 m diameter pipe
◎
COMPONENT INSPECTOR

Reversible pump-turbine

Select a labelled component to understand its role.

02 / DISCOVER THE SYSTEM
OVERVIEW • ABOUT THIS 3D SIMULATION

About This 3D Simulation

A pumped-storage hydropower plant is a giant rechargeable battery that uses water and elevation instead of chemical cells. It moves water uphill when electricity is plentiful and allows that water to return downhill when electricity is needed.

This interactive 3D pumped-storage hydropower simulator reveals the most important features of such a facility in one navigable engineering scene. Look to the elevated basin for the upper reservoir and to the valley for the lower reservoir. A high-pressure penstock links the water to a powerhouse, where a reversible pump-turbine shares a rotating shaft with a motor-generator. A cutaway enclosure reveals the mechanical equipment, while a simplified transmission line suggests the connection to an electrical grid.

Switch between generation and pumping modes to reverse the animated water flow. During generation, descending water transfers energy to the turbine and electrical machine. During pumping, the electrical machine draws energy from the grid and drives the hydraulic machine to lift water back up the hill. Change the hydraulic head, flow rate or conversion efficiency to see calculated power change immediately. Reservoir indicators track the transfer of water over simulated time, and energy counters distinguish electricity produced from electricity consumed.

The scene supports orbiting, zooming, component inspection, camera focus and a transparent cutaway. These interactions make relationships easier to see than they would be in a static diagram. The model is designed for students, teachers, engineering enthusiasts and anyone curious about renewable energy storage, hydroelectric generation and electricity networks.

Real pumped-storage installations vary widely: some use tunnels through mountains, some place machines deep underground and some use separate pumps and turbines. The geometry here is intentionally illustrative, not a replica of a particular site. The calculations also simplify important effects such as hydraulic losses, changing water-surface elevations and performance curves. That makes this experience useful for understanding system behaviour and sensitivity, but not for designing or operating an actual power station.

TECHNICAL EXPLAINER • HOW IT WORKS

How It Works

1. Storing energy as elevation

When water is raised into the upper reservoir, it gains gravitational potential energy. The useful quantity is the hydraulic head, or effective height through which water can deliver energy. In this educational model the selected head is held constant, even though a real station's net head changes with water levels, flow and pipe losses. A higher head means more energy available for each cubic metre of water, provided other conditions remain the same.

2. A two-way hydraulic circuit

In generation mode, water exits the upper basin through a pressurised penstock and travels towards the turbine. Its energy spins a stylised Francis-type runner inside the powerhouse. The shared shaft drives a motor-generator, which converts mechanical power into electricity. Water is released into the lower reservoir. In pumping mode the electric machine acts as a motor; the turbine assembly operates as a pump and sends water back uphill. The flowing markers and rotating components reverse to show the change in operating direction.

3. Calculating power

For the idealised hydraulic power, the simulator uses Phydraulic = ρ × g × Q × H, where water density ρ = 1,000 kg/m³, gravitational acceleration g = 9.81 m/s², Q is flow in m³/s and H is head in metres. Electrical output in generation mode is estimated as Pgenerate = η × Phydraulic. Electrical input in pumping mode is estimated as Ppump = Phydraulic ÷ η. The same adjustable efficiency η is applied in both modes as a teaching simplification.

For example, 24 m³/s of water at 90 m head gives approximately 21.2 MW of ideal hydraulic power. At 88% efficiency, that produces about 18.6 MW electrically. Pumping the same flow uphill under the same assumed conditions needs around 24.1 MW from the grid. This asymmetry illustrates why an energy-storage cycle always consumes more electricity than it later delivers.

4. Reservoir volumes, time and stored energy

The demonstration uses a total transferable water volume of 2.4 million m³, shared between its two reservoirs. The initially stored fraction is 68%. During each simulation step, the model transfers ΔV = Q × Δt, stopping automatically when the source basin has no more transferable water. The upper reservoir's approximate deliverable energy is calculated from its remaining volume, head and generation efficiency. The displayed operating duration assumes the current flow remains constant until a reservoir limit is reached. The time-speed selector accelerates the represented time without changing the physical units of the formulas.

5. What the visual model leaves out

This is an educational engineering visualisation rather than computational fluid dynamics or a control-room-grade digital twin. The moving water particles represent direction and relative activity; they do not solve the Navier–Stokes equations. Turbine rotation is linked visually to flow but is not calculated from real runner blade geometry, guide-vane position or electrical grid frequency. The model also omits reservoir geometry changes, pressure transients, cavitation, minimum operating flow, grid synchronisation, pump start-up and detailed plant losses. Real efficiency is not constant; both pumping and generating performance depend on head, flow and machine design.

Use the simulation to compare scenarios: double the head, raise the flow, lower the efficiency or reverse the operating mode. Each experiment demonstrates a fundamental energy-system relationship while keeping the assumptions explicit.

For technical background, see the NREL pumped-storage electrical systems report and the Sandia energy storage handbook.

GUIDE • HANDS-ON EXPERIMENTS

How to Use This Simulation

01

Navigate the 3D scene

Click and drag inside the model to rotate your view. Scroll or pinch to zoom. Use a right-button drag or touch gesture to pan. Select Reset camera to return to the wide overview.

02

Inspect the machinery

Select a labelled hotspot or click a visible machine component to read an explanation in the component inspector. Clicking a hotspot also moves the camera closer. The Focus machinery button moves to the powerhouse. Turn the cutaway on or off to change its transparency.

03

Change modes and parameters

Choose Generate to transfer water downhill or Pump to move water uphill. Adjust head, flow rate and conversion efficiency with the sliders. Examine the resulting electrical power and idealised pressure readings.

04

Control and observe the experiment

Pause or resume the simulation using its main button; the space bar also toggles playback while no form control is focused. Change simulated time from 1× up to 600×. Watch water levels, time to limit, stored deliverable energy and cumulative energy counters. Press Reset all values to restart the experiment.

05

Try a controlled comparison

Hold flow rate and efficiency steady. Increase head from 60 m to 120 m and compare output power. Then switch to pumping without changing the other sliders. Observe that energy input exceeds the hydraulic power transferred because conversion has losses.

ENGINEERING RELATIONSHIP

The physics of falling water

Water power is proportional to flow rate and hydraulic head, before machine efficiency.

P = ρ · g · Q · HHYDRAULIC POWER · WATTS
04 / DEEPER QUESTIONS

Frequently Asked Questions (FAQ)

Ten detailed answers about pumped-storage hydropower and what this model can teach you.

10 QUESTIONS / 10 ANSWERS
What is pumped-storage hydropower, and why is it considered energy storage?

Pumped-storage hydropower is a method of storing electricity as the gravitational potential energy of water. When electricity is readily available, pumps lift water from a lower reservoir to an upper one. When the grid needs electricity, the station releases the elevated water through a turbine that drives a generator. The facility does not create energy from nothing: it shifts energy from one period to another, losing some along the way. It is therefore best understood as a large-scale rechargeable storage system rather than a conventional source of new fuel. In this 3D simulation, the two basins, connecting penstock and reversible machine make the energy-transfer cycle visible.

How does a reversible pump-turbine change between generating and pumping?

A reversible pump-turbine is designed to transfer energy between a water circuit and a rotating shaft in either direction. During generation, water flows from the upper reservoir through the runner, applying torque to the shaft. The motor-generator then operates as a generator and delivers electricity. During pumping, electrical power drives the motor-generator as a motor, forcing the runner to push water towards the upper reservoir. Real equipment must manage guide vanes, valves, pressure, speed and switching procedures carefully. This interactive example reverses particle travel and shaft animation when you change modes. It illustrates the operating principle, but its transition is instantaneous and does not reproduce industrial start-up sequences.

Which components are essential in a pumped-storage hydroelectric plant?

Most conventional pumped-storage plants use upper and lower water reservoirs at different elevations, a water conveyance system such as a tunnel or penstock, one or more hydraulic machines, electrical machines and switchgear. The penstock transports water under pressure. A pump-turbine converts between hydraulic and shaft power; a motor-generator converts between shaft power and electrical power. Gates, valves, transformers, protection systems and control equipment support safe operations. The educational 3D model emphasises the reservoirs, penstock, reversible runner, generator and powerhouse. Its transmission structures suggest the electricity network, while many real auxiliary systems have intentionally been omitted to keep the principal process easy to explore.

How do water flow and hydraulic head determine the electrical power?

The available hydraulic power is approximately the product of water density, gravitational acceleration, volumetric flow rate and hydraulic head: P = ρgQH. If head doubles and flow remains constant, hydraulic power doubles under the same simplified assumptions. If flow doubles at the same head, power also doubles. To estimate electrical generation, multiply by the conversion efficiency. To estimate pumping input for the same hydraulic transfer, divide by efficiency. The interactive sliders expose these relationships directly. Real stations operate under additional constraints, including turbine efficiency curves, available water, hydraulic friction, pressure limits and minimum or maximum machine ratings, so simple proportionality does not always describe actual operation.

Why are pumped-storage stations useful for wind and solar electricity networks?

Wind and solar generation vary with weather and daylight, while electricity demand changes across the day. Pumped-storage stations can absorb electricity during periods of surplus supply and return electricity when it becomes more valuable to the network. Depending on the plant, they can also provide flexibility, operating reserves and other grid-support services. This does not make storage perfectly efficient, nor does it mean every site is environmentally or economically suitable. Reservoir availability, geography, transmission access and construction cost matter greatly. In the simulator, switching from pumping to generation demonstrates the central trade-off: energy is stored by lifting water and later recovered at a lower electrical yield.

What do efficiency and round-trip efficiency mean for a storage plant?

Conversion efficiency indicates the share of input power transferred usefully through a machine or process. When generating, efficiency reduces the electrical power delivered compared with the hydraulic power available. When pumping, the electrical input must exceed the hydraulic power added to the stored water. Round-trip efficiency compares the electrical energy ultimately recovered with the electricity originally used to pump the water, over a complete cycle. This simulator uses one adjustable efficiency value in both directions and ignores additional losses, so its idealised round-trip fraction is approximately the square of that setting. For example, 88% in each direction gives about 77% overall. Actual plants have varying efficiencies and additional losses.

How can I use the simulator to compare different operating scenarios?

Begin with the default generation mode and observe electrical power, head, flow and the remaining upper-reservoir volume. Hold two settings constant and change only one, such as increasing the head from 60 m to 120 m. Notice the proportional change in predicted hydraulic power. Next, lower the efficiency while leaving head and flow unchanged to examine conversion losses. Switch to pumping to see the water markers move uphill and the electrical power figure represent consumption rather than output. Finally, select an accelerated time scale to observe changing volumes and energy totals. Use Reset all values between trials to make comparisons fair and reproducible.

What happens when the upper or lower reservoir reaches its operating limit?

A pumped-storage system cannot continue transferring water indefinitely. In generation mode, the upper reservoir must contain enough transferable water; in pumping mode, the lower reservoir must provide it. The demonstration represents a fixed transferable volume of 2.4 million cubic metres, divided between two linked basins. As a simulation runs, water is transferred according to its selected flow rate and the amount of simulated time elapsed. It automatically stops when the source basin reaches its modelled limit and displays a status message. Real reservoirs may have environmental operating restrictions, minimum water levels, spillways and complex seasonal inflows, which this closed-loop teaching model does not include.

Is this 3D simulation accurate enough to design a real hydropower plant?

No. The experience is intended for education and qualitative engineering exploration, not equipment selection, safety assessment or hydraulic design. Its power calculations use familiar conservation-of-energy relationships, but the head is fixed at the selected value and conversion efficiency is uniform. The plant does not calculate turbulent losses, transient pressure surges, cavitation, blade loading, control instability, reservoir-level-dependent head or generator electrical dynamics. Visual water particles are animation markers rather than a numerical fluid dynamics solution. Real hydroelectric design requires site surveys, hydraulic and geotechnical studies, mechanical performance data, grid studies, regulations, detailed numerical models and qualified engineering review. Treat the results as illustrative estimates with clearly stated assumptions.

Why does pumped storage have such large energy capacity, yet limited power output?

Energy capacity and power output describe different properties. Stored energy depends principally on how much water can be transferred and the effective elevation difference. Power depends on how quickly that water flows through the machines, along with head and efficiency. A reservoir containing a very large volume of water may store many hours of electricity, but the plant's turbines, penstocks and generators impose limits on instantaneous output. Conversely, a high-power station with a small active storage volume may only run for a short period before reaching its reservoir limit. In this simulator, reservoir volume determines approximate energy capacity and operating duration, while the flow and head controls set the estimated instantaneous power.

Made with 🤖 ChatGPT · Three.js