EXPERIMENT NO. 017 / ROTATIONAL MECHANICS

Planetary gearbox simulator.

Explore the hidden mechanics of an epicyclic gear train. Drive the sun or ring, lock a member, and watch the planet gears reveal the mathematics of compact power transmission.

3D interactive model24 / 18 / 60 teeth3 transmission modesPhysics-based kinematics
Featured experimentPrecision in motion.

Inspect the mechanism, change real engineering parameters, and understand how one gearset produces three distinct outcomes.

FIG. 01 / EPICYCLIC MECHANISM
RUNNING
Initializing 3D engine…WebGPU / WebGL 2 compatible browser required
DRAG Orbit   /   SCROLL Zoom   /   CLICK Select part
Loading rendering engine…
THE MACHINE / OVERVIEW

About This 3D Simulation

A planetary gearbox is one of the most space-efficient ways to transform rotational speed and torque. Instead of placing gears in a straight sequence, an epicyclic transmission surrounds a central sun gear with smaller planet gears, all meshing with an internal ring. The planet shafts sit on a common carrier, creating a compact assembly whose input and output can share an axis. This arrangement is widely used in power tools, robotics, automotive transmissions, industrial machines, and heavy-duty drive systems.

This interactive 3D planetary gearbox simulator presents a cutaway of a single-stage, three-planet transmission. The gold sun gear has 24 teeth; each turquoise planet has 18 teeth; and the silver ring carries 60 internal teeth. Their pitch-circle dimensions are geometrically consistent with a three-planet layout. Modelled hubs, bearings, retaining hardware, structural supports, and an inspection frame make the arrangement easier to study. A rotating marker on each moving member helps reveal how the planets spin on their own axes while travelling around the centre.

Use the mode selector to switch between three mechanical configurations: ring fixed with sun input, sun fixed with ring input, or carrier fixed with sun input. Each setting applies the same planetary-gear equations but leads to a different speed ratio and, in one case, a reversed output direction. Adjust the input speed and torque, compare predicted output RPM and torque, and inspect the power balance. Pause the motion, rotate the 3D camera, select individual parts, or move the assemblies apart using the exploded-view control.

The experience combines realistic-looking procedural metal surfaces and smooth motion with an explicitly simplified scientific model. The underlying kinematics preserve the relationships imposed by the gear tooth counts, while torque estimation assumes a constant illustrative efficiency. It is intended for students, engineers in training, mechanical-design enthusiasts, and anyone curious about how compact transmissions work. Because the physical equations are separate from the visual presentation, the simulator can demonstrate real mechanical relationships without pretending to be a detailed contact-stress or fatigue analysis.

ENGINEERING / DEEP DIVE

How It Works

The operating principle

A planetary or epicyclic transmission contains three coaxial functional members: sun, ring, and carrier. The planets connect them through two mesh types. Externally meshed sun and planet teeth rotate in opposite relative directions, while the internally meshed planet and ring rotate in the same relative direction. Locking one member leaves a definite ratio between the other two. This makes a single planetary set much more versatile than an ordinary pair of fixed-axis spur gears.

Tooth counts and geometric constraints

The demonstration uses a 24-tooth sun (Ns), three 18-tooth planets (Np), and a 60-tooth internal ring (Nr). For a standard simple gearset, Nr = Ns + 2Np: here, 60 = 24 + 36. The gears also share the same module, which makes the pitch radii compatible. Three equally spaced planets are feasible because (Ns + Nr) / 3 = 28 is an integer. Stylized teeth preserve these tooth counts and approximate pitch diameters without claiming exact involute geometry.

The speed equation

The model is governed by Willis's relation, which compares sun and ring speeds relative to the carrier. Speeds are signed, allowing reverse motion to be represented naturally. Solving that relation determines the carrier speed for a given pair of constraints. The spin of each individual planet is calculated separately from the sun–planet mesh constraint in the moving carrier frame.

Three operating configurations

With the ring fixed and sun driven, the carrier speed equals 24/84 of the input: a 3.5:1 reduction. With the sun fixed and ring driven, the carrier speed equals 60/84 of the input: a 1.4:1 reduction. With the carrier fixed and sun driven, the ring runs backwards at 24/60 of the sun speed: a reverse 2.5:1 magnitude ratio. The simulator immediately updates all component angular velocities when you select a different configuration.

Torque, power, and efficiency

The ideal mechanical power associated with a rotating shaft is P = Tω, where torque T is in newton-metres and angular velocity ω is in radians per second. For a steady gearbox, a slower output can carry more torque at roughly the same power. This model computes output torque by multiplying input torque by the speed reduction and an illustrative constant efficiency of 94 percent. It displays input and output power so you can see the assumed loss. It does not simulate motor acceleration, backlash, bearing loads, or thermal behaviour.

Controls, observations, and limitations

The Input speed slider adjusts the signed input shaft rate, while Input torque changes the estimated power and output torque without changing the gear ratio. Reverse input flips the direction of the driven member; the playback multiplier changes animation time only. Exploded view separates assemblies along the shaft axis without modifying their mathematical motion. Camera orbit, part selection, and the ghosted casing help with visual inspection. The mechanical contacts are idealized and the simplified tooth surfaces are not intended for manufacturing, stress validation, or safety-critical predictions.

Ns(ωs − ωc) + Nr(ωr − ωc) = 0Willis equation · s = sun, r = ring, c = carrier · angular speeds in consistent units
GET STARTED / INTERACTIVE GUIDE

How to Use This Simulation

  1. Rotate and zoom: drag the 3D viewport to orbit the gearbox, scroll or pinch to zoom, and use the reset-camera button to return to the original view. On a mouse, use the right button to pan. Focus the viewport and use arrow keys to rotate with the keyboard.
  2. Run the mechanism: choose Pause to freeze the moving parts; press Start / Resume to continue. Reset all restores the initial mode, inputs, camera-independent visual settings, and gear angles.
  3. Choose a mode: the transmission selector changes which member is locked and which is driven. Observe the output direction, output RPM, and reduction ratio.
  4. Experiment with parameters: use Input speed, Input torque, or Reverse input. Playback multiplier speeds up or slows down the visual demonstration without altering engineering results.
  5. Inspect components: click the sun gear, planets, ring, or carrier to see a part-specific explanation in the telemetry panel. Exploded view separates the gear stages, and Ghost housing makes the structural frame translucent.
  6. Interpret the measurements: signed RPM indicates rotational direction, the speed reduction is the absolute input/output speed ratio, and output torque includes an illustrative 94% efficiency. The exploded layout is a visual aid, not an engaged operating condition.
  7. Try a quick experiment: compare 90 RPM in the three modes. Expect approximately +25.7 RPM, +64.3 RPM, and −36 RPM at the output. This comparison isolates the effect of which gearbox member is held fixed.
KNOWLEDGE BASE / 10 QUESTIONS

Frequently Asked Questions (FAQ)

Detailed answers about planetary gearing, operating modes, measured values, and the limitations of this interactive model.

What is a planetary gearbox and why is it useful?

A planetary gearbox, also called an epicyclic gear train, transfers rotational motion between a central sun gear, surrounding planet gears, a ring gear, and a carrier. Unlike a simple pair of gears, it offers several possible input, output, and fixed members within the same compact package. That flexibility makes planetary gearboxes especially useful when a machine needs high torque, efficient power transmission, and a coaxial layout. The load can be shared among multiple planets rather than carried by a single gear contact. This interactive model shows a basic three-planet arrangement; its ratios come from tooth counts, not from arbitrary animation settings. Real gearboxes also require bearings, lubrication, carefully designed tooth profiles, and rigid housings.

How does the sun gear drive the planetary gear system?

In the standard reduction mode shown here, the sun gear provides the rotating input while the ring gear is locked to the housing. Each planet meshes with both the sun and the internal teeth of the ring, so it must spin about its own pin while also travelling around the centre. The carrier connects those pins and therefore turns as the planets orbit. With 24 sun teeth and 60 ring teeth, the carrier runs at 24 ÷ 84, or approximately 28.57 percent, of the sun speed. The output is slower but can deliver more torque in an ideal power balance. Use the input-speed slider to see that the ratio stays constant even as all the rotational speeds change.

Which parts make up this interactive planetary gearbox?

The gold central component is the 24-tooth sun gear. Three cyan 18-tooth planet gears are equally spaced around it, and the silver internal ring gear contains 60 teeth. A dark metallic carrier holds the planet shafts in a rigid pattern and rotates with their orbital motion. The surrounding frame, mounting hardware, and bearings are visual context for an inspectable assembly. You can select the sun, planets, ring, or carrier in the 3D viewer to read a concise component description. The exploded-view slider moves major assemblies along their common axis to reveal the layout. It is a teaching cutaway, so fasteners, tooth profiles, and bearing clearances are illustrative rather than manufacturing specifications.

Why do planetary gears spin and orbit at the same time?

A planet gear has two distinct motions: rotation about its own centre and revolution around the sun with the carrier. Those motions are mechanically linked. If the carrier moves, a planet's centre follows a circular path even when the planet's local spin is small or points in the opposite direction. To calculate the spin correctly, engineers work with rotational speeds relative to the carrier. For the sun–planet contact in this model, 24 times the sun's relative speed plus 18 times the planet's relative spin must equal zero. The animation applies that relation to each planet while moving its centre with the carrier. Watch the small marker on a planet face to distinguish the two motions.

Where are planetary gearboxes used in real machinery?

Planetary gear trains appear in automotive automatic transmissions, industrial robotics, electric vehicle drivetrains, wind-turbine gearboxes, cordless power tools, construction equipment, and precision motion-control systems. Their compact coaxial arrangement suits machines where the input and output shafts should share an axis. Multiple planet contacts can also distribute torque and reduce the required size of individual gears, although actual load sharing depends on manufacturing tolerances and housing stiffness. Vehicle transmissions often combine multiple planetary sets with clutches and brakes to achieve several gears. This simulator intentionally shows one simple set, allowing you to understand its basic reduction and reversing behaviours before exploring more complicated compound transmission architectures.

How is the gear ratio calculated from tooth counts?

The fundamental planetary relation is Ns(ωs − ωc) + Nr(ωr − ωc) = 0, where N denotes tooth count and ω denotes signed rotational speed. In this model, Ns is 24 and Nr is 60. Locking the ring gives a sun-to-carrier speed reduction of (24 + 60) ÷ 24 = 3.5:1. Locking the sun and driving the ring gives 84 ÷ 60 = 1.4:1. Holding the carrier still and driving the sun makes the ring rotate in reverse at a speed magnitude of 24 ÷ 60 = 0.4 times the input, giving a 2.5:1 magnitude ratio. The live dashboard recalculates these results whenever you change operating mode.

How can I test each mode in the 3D simulation?

Begin with the default ring-fixed reduction mode and press Pause if you want to inspect individual gear teeth. Drag the scene to orbit the camera, scroll or pinch to zoom, and click a coloured component to identify it. Change the transmission mode to lock the sun or the carrier instead; watch the live output RPM and motion direction update immediately. Move Input speed to explore the rate of rotation, then adjust Input torque to compare predicted output torque and mechanical power. Use Exploded view to separate major assemblies visually and Ghost housing to see through the supporting frame. Restore the normal assembled state with Reset. The playback multiplier changes demonstration time, not the mechanical gear ratio.

What happens when input speed or torque increases?

Increasing input speed makes every moving member rotate proportionally faster, while the selected tooth-count ratio remains unchanged. The model reports output speed in RPM using signed kinematics, so a negative sign identifies reverse rotation in carrier-fixed mode. Increasing the specified input torque raises the estimated output torque and transferred power, provided the same model efficiency is assumed. The calculation uses a constant 94 percent efficiency for illustration; real efficiency varies with lubrication, bearing friction, load, temperature, and speed. There is no dynamic motor, acceleration ramp, or torque limit in this demonstration. For that reason, a high displayed torque should not be interpreted as a safe operating rating for an actual gearbox.

Does this model simulate realistic gear contact and engineering losses?

It models the rotational constraints and idealized power flow of a single planetary gear train, but it does not resolve tooth-to-tooth contact forces, elastic deformation, backlash, vibration, or heat generation. The visible teeth are stylized procedural geometry, not exact involute profiles ready for machining. Bearings, shafts, and the casing are also simplified. Output torque assumes steady-state power transfer at a fixed illustrative 94 percent efficiency rather than a detailed friction model. The exploded view is purely a visualization aid and does not represent a mechanically engaged operating condition. Treat the display as an educational kinematic simulation, not a certified design calculation, maintenance procedure, or safety assessment for physical machinery.

Can planetary gearsets be combined into advanced transmissions?

Yes. A compound transmission can connect two or more planetary sets and control different members through clutches and brakes. By choosing which member is driven, restrained, or coupled to another set, an automatic transmission can produce multiple forward ratios, reverse, and sometimes a near-direct drive. Differential planetary systems can also split or combine power between separate shafts; electrically controlled power-split drivetrains are one prominent example. Analysis still starts with relative-speed equations, but additional shaft constraints and power balances are required. This single-set demonstration is a useful first step: experiment with all three constraint configurations and observe how a locked member changes the remaining speeds before studying compound gear-train design.

Made with 🤖 ChatGPT · Three.js