INTERACTIVE ENGINEERING EXHIBIT 01 — TRANSMISSION SYSTEMS

Planetary Gearbox 3D Simulator

See how a compact epicyclic transmission turns high-speed rotation into controlled mechanical torque. Inspect every gear, adjust the inputs, and follow the physics in real time.

WEBGPU / WEBGL 2LIVE KINEMATICSINTERACTIVE 3D
GEAR TRAIN / SINGLE STAGE3.5:1FIXED-RING REDUCTION
24 SUN · 18 × 3 PLANETS · 60 RING
01 / LIVE ENGINEERING VIEW

Explore the mechanism

Initializing renderer
PERSPECTIVE / ENGINEERING MODELRENDERER / STARTING
Loading 3D transmissionPreparing geometry and renderer…
◎ DRAG TO ORBIT · SCROLL TO ZOOM · CLICK A GEAR TO INSPECT
— FPS
VIEWPORT TOOLS
COMPONENT INSPECTOR
☼

Sun gear — high-speed input

The 24-tooth central gear delivers rotation into the transmission. It turns 3.5 times for each revolution of the output carrier.

GEAR TRAIN EQUATIONi = 1 + Nr / Ns = 1 + 60 / 24 = 3.5FIXED RING / SUN INPUT / CARRIER OUTPUT
02 / THE SYSTEM◎

CONCENTRIC POWER
TRANSMISSION

ENGINEERING OVERVIEW

About This 3D Simulation

A planetary gearbox—also called an epicyclic gear train—is a compact transmission in which several gears share the work of transferring rotational motion. Unlike a conventional pair of meshing gears, the planetary arrangement contains a central sun gear, multiple planet gears, an internally toothed ring gear, and a carrier that holds the planet shafts. These components can provide substantial speed reduction in a relatively small space while keeping the input and output axes aligned.

This interactive exhibit presents a single-stage planetary gearbox with a 24-tooth sun, three 18-tooth planets, and a stationary 60-tooth ring. The input shaft drives the golden sun gear. As it turns, the blue planet gears spin about their own axes while orbiting the sun. The copper-colored carrier gathers their orbital motion and serves as the slower output shaft. Because the ring is held still, each full rotation of the carrier requires 3.5 rotations of the sun gear.

Explore the assembly from any angle, switch to a top-down engineering view, or pull the parts apart using the exploded-view slider. Select a gear or use the component selector to read about the ring, sun, planets, and carrier. A translucent inspection mode reveals otherwise obscured moving components, and optional labels help connect the three-dimensional mechanism to its engineering terminology.

The control deck allows you to change input speed, motor torque, and assumed transmission efficiency. The live instrumentation recalculates carrier speed, ideal ratio, available output torque, delivered mechanical power, and estimated heat loss. Try raising input speed while holding torque constant, then increase torque at the same speed to discover the distinct roles of speed and force in mechanical power.

Planetary transmissions appear in automatic automotive gearboxes, robotic joints, helicopter drives, wind turbines, industrial machinery, and many other compact powertrains. This browser-based model focuses on one clearly defined arrangement: a fixed ring, sun-driven input, and carrier output. The geometry and motion represent the essential kinematics; the simplified power model does not simulate tooth elasticity, lubrication, bearing wear, or a motor's detailed response to excessive load. That distinction makes the simulation useful as an accessible learning tool rather than a substitute for engineering validation.

24SUN TEETH
3 × 18PLANET TEETH
60RING TEETH
3.5:1REDUCTION
03 / THE PHYSICS∑

ROTATION · FORCE
ENERGY · TORQUE

MECHANICAL PRINCIPLES

How It Works

The motion path

A planetary transmission works by coupling the rotation of three basic members: the sun gear, the ring gear, and the planet carrier. The planet gears mesh externally with the sun and internally with the ring. Their centres are mounted on the carrier, so they can both spin on their pins and travel around the central axis. The arrangement is called epicyclic because the planets combine these two forms of motion.

The tooth-count relationship

In this exhibit, the ring gear is bolted to the stationary housing. The sun gear receives mechanical input and drives three equally spaced planet gears. Each planet rolls against the inner teeth of the stationary ring, forcing the carrier to rotate in the same direction as the sun but at a lower speed. An important design requirement is that the tooth counts are compatible: here, 60 = 24 + 2 × 18. The three-planet arrangement is also evenly indexable because (60 + 24) ÷ 3 is an integer.

Kinematics and the Willis equation

The central kinematic relationship is the Willis equation: (ωs − ωc) / (ωr − ωc) = −Nr / Ns. Here ω is angular velocity, with subscripts s for sun, r for ring, and c for carrier; N denotes tooth count. Setting ring speed ωr to zero gives ωc = ωs × Ns / (Ns + Nr). With 24 sun teeth and 60 ring teeth, the reduction ratio is i = 1 + 60 / 24 = 3.5. At 700 input revolutions per minute, the carrier therefore rotates at 200 revolutions per minute.

How the planets rotate

The planet gears have their own rotational speed, distinct from the carrier's orbit. Relative to the rotating carrier, each planet turns in the opposite direction to the sun's relative rotation. The model updates both motions from the same accumulated angular displacement, so changing the simulation speed does not gradually break the relationship between the gears. Individual teeth are simplified for efficient browser rendering; they are not manufactured involute tooth profiles or a numerical contact simulation.

Torque, energy, and efficiency

Speed reduction provides a mechanical torque advantage. Under ideal lossless conditions, output torque equals input torque multiplied by the 3.5 reduction ratio. Real gearboxes lose energy to friction, oil churning, bearings, and deformation. This simulation uses a single adjustable efficiency parameter η: output power = η × input power, and output torque = η × 3.5 × input torque. Input mechanical power is calculated as P = τ × 2π × RPM / 60, where torque τ is measured in newton-metres and power in watts. The difference between input and output power is displayed as estimated dissipated heat.

Understanding overload and simplified views

The displayed load is a demand indicator, not a dynamic friction or motor controller. If required load torque exceeds the calculated available output torque, the model marks the condition as overloaded, but continues animating at its commanded kinematic speed. In reality, a motor might slow, stall, trip a protection circuit, or suffer damage depending on its torque–speed curve and control system. Similarly, changing an exploded view moves components apart for teaching purposes rather than simulating a mechanically assembled transmission.

What to learn from the experiment

The principal lesson is that tooth count fixes the ideal speed relationship, while input torque and efficiency determine the power available to do work. The controls let you explore these relationships independently and observe why a compact gear stage can trade rotational speed for output torque without creating energy.

CORE RELATIONSHIP
ωc = ωs × Ns / (Ns + Nr)

For this fixed-ring configuration, carrier speed is the sun speed divided by 3.5.

04 / OPERATING INSTRUCTIONS

How to Use This Simulation

Six steps to explore the gearbox, its components, and its energy transfer.

01

Orbit the mechanism

Drag in the 3D viewport to rotate the camera. Use the mouse wheel or trackpad to zoom, and right-drag to pan. On a touchscreen, drag with one finger to orbit and pinch with two fingers to zoom.

02

Run and inspect

Select Pause to freeze the mechanism, or Play to continue. Reset restores all default parameters and the default camera. Choose Isometric, Top, or Side to jump between inspection angles.

03

Change operating conditions

Drag Input speed, Input torque, Transmission efficiency, and Output load. The dashboard recalculates carrier RPM, available output torque, input power, useful output power, and estimated heat loss.

04

Take the gearbox apart

Increase Exploded view to separate the major stages along the shaft. Toggle X-ray ring to make the stationary ring translucent. Toggle Part labels to identify key components.

05

Select a component

Click a highlighted gear in the viewport or choose it from the Component selector. The information card identifies its role and how it moves.

06

Try an experiment

Double Input speed while keeping torque constant; observe that output RPM and transmitted power double. Next, keep speed fixed and double torque; output torque and power rise, but the gear ratio stays 3.5:1.

05 / REFERENCE DESK

Frequently Asked Questions (FAQ)

Ten detailed answers on planetary gear operation, ratios, physics, and real-world uses.

01What is a planetary gearbox, and why is it called epicyclic?

A planetary gearbox is a gear transmission with a central sun gear, one or more planet gears, a surrounding internally toothed ring gear, and a carrier that supports the planet shafts. The term “epicyclic” describes the fact that each planet can rotate about its own axis while its centre travels around the central sun. That combined movement differs from an ordinary gear pair, in which the gear axes remain fixed. Depending on which member is driven, held still, or used as the output, the same general architecture can produce reduction, overdrive, or reverse motion. The specific interactive gearbox shown here holds the ring stationary, drives the sun, and collects output from the carrier.

02How does the fixed ring create a 3.5:1 speed reduction?

The stationary ring prevents the planet gears from simply spinning in place around a fixed carrier. As the input sun rotates, each planet rolls against the ring’s inner teeth, carrying its pin—and therefore the carrier—around the centre. The speed relationship is determined by tooth counts rather than by the size or strength of the motor. For a fixed ring with a sun input and carrier output, the reduction ratio is 1 + ring teeth / sun teeth. This model uses 60 ring teeth and 24 sun teeth, giving 1 + 60/24 = 3.5. Thus an input of 700 RPM produces an output of 200 RPM in the ideal kinematic model.

03What roles do the sun, planet gears, carrier, and ring play?

The golden sun gear is attached to the high-speed input shaft and supplies rotational motion. Three blue planet gears mesh with the sun; each also meshes internally with the surrounding ring. The planet carrier supports the planet pins, maintaining the correct spacing while allowing the planet centres to orbit. The carrier is connected to the reduced-speed output shaft. The outer ring gear is fixed to the housing and supplies the reaction needed to create reduction. These members are mechanically coupled, so the planets cannot independently choose arbitrary speeds. Click each coloured component in the simulation to compare its location, rotational behaviour, and job in the power path.

04Why do the planet gears spin and orbit at the same time?

The carrier physically moves the centres of the planet gears in a circular path. Meanwhile, contact with the sun and ring requires each planet to rotate about its own shaft to maintain the appropriate tooth relationship. These two simultaneous movements are easiest to understand in a rotating reference frame: relative to the carrier, the sun turns forward and each planet turns backward in a ratio determined by their tooth counts. Seen from the fixed housing, a planet’s absolute spin combines that relative rotation with the carrier’s orbital rotation. The simulation computes these rotations from the same gear equations, rather than independently animating parts by eye, although actual tooth contact is visually approximated.

05Where are planetary gear drives used in real machines?

Planetary drives are useful where high torque density, a coaxial layout, and balanced load distribution matter. They appear in robotic actuators, industrial servo reducers, construction equipment, wind-turbine drivetrains, automatic transmissions, and some helicopter or aerospace gear systems. Multiple planets may share loads, allowing a compact package to transfer substantial torque. Actual machines often use several planetary stages, clutches, brakes, or alternative configurations to obtain more than one ratio. This exhibit shows only a single fixed-ring reduction stage, so it does not represent the shift logic of an automotive automatic transmission. It is designed to reveal the mechanical principle that many more complicated assemblies build upon.

06How are gear ratio, output speed, and torque related?

For this model, the gear ratio is 3.5:1. Ignoring loss, output speed is input speed divided by 3.5, and output torque is input torque multiplied by 3.5. Mechanical power does not magically increase: lower rotational speed compensates for the greater torque. The live display adds an efficiency factor to represent mechanical losses. If you set an input torque of 40 N·m and efficiency of 95%, calculated output torque becomes 40 × 3.5 × 0.95 = 133 N·m. At 700 input RPM, the corresponding carrier speed is 200 RPM. These figures come from a steady-state engineering approximation, not from a detailed motor or bearing simulation.

07What does the efficiency control change in the simulation?

Transmission efficiency estimates the fraction of input mechanical power that remains as usable output power. At 95% efficiency, the model assumes that 95% is delivered to the carrier and 5% is lost. Lowering the efficiency slider decreases the calculated available output torque and raises the displayed heat-loss estimate. It does not change the 3.5:1 kinematic ratio or tooth geometry, because tooth counts fix the speed relationship in this idealized arrangement. Real efficiency varies with speed, temperature, lubrication, load, and manufacturing quality. The adjustable value is a teaching parameter rather than a measured efficiency curve for a specific commercial gearbox.

08What happens when output load exceeds available torque?

The load control represents the torque demanded by an external machine connected to the carrier shaft. If that demand exceeds the calculated output torque available from the selected input and efficiency, the interface shows an overload warning and a negative torque reserve. The display still rotates at the specified speed because this model is kinematically driven: it assumes the input shaft follows the commanded RPM. A real motor and gearbox would respond according to the motor torque–speed curve, control electronics, inertia, thermal limits, and protective devices. Possible outcomes include deceleration, stalling, a trip, or damage. Use the warning to understand the operating margin, not as a predictive failure test.

09Does the 3D model use exact gear-tooth contact physics?

No. The simulation uses correct ideal speed relationships and matching nominal tooth-count geometry, but its decorative teeth are not engineered involute profiles. It does not solve individual contact forces, backlash, stiffness, vibration, oil-film behaviour, or detailed bearing losses. Consequently, visual tooth surfaces can appear closer than production components would be, especially during exploded inspection. The ring stays fixed and the sun, planet, and carrier motions obey the theoretical kinematic constraints for a simple planetary stage. This is a conceptual engineering visualization suitable for learning gear behaviour, not a validated design model for manufacturing, load certification, or finite-element analysis.

10Can a planetary gear set provide reverse, direct drive, or overdrive?

Yes, although those modes require a different mechanical arrangement from the one animated here. A planetary gear set has three primary members, and changing which member is held, driven, or used for output changes the speed relationship. In multi-stage automatic transmissions, clutches and brakes connect or restrain different members to produce several forward ratios and sometimes reverse. A 1:1 direct-drive condition can occur when two members are locked together so the set rotates as a unit. Overdrive is also possible in suitable input/output configurations. This exhibit intentionally keeps the ring fixed and the sun as input so users can explore one unambiguous 3.5:1 reduction in detail.

Made with 🤖 ChatGPT · Three.js