Oldham Coupling: Offset Shafts, Sliding Disc and the Thales Circle
Two parallel but offset shafts joined by a floating slotted disc. The output turns at exactly the input speed, while the disc centre runs round a small circle at twice that speed.
Plastic disc, small offset Perfectly aligned (e = 0) Steel disc, large offset, 3000 rpm Overspeed, steel, 6000 rpm Dry running (mu = 0.3) Greased (mu = 0.03) Small coupling D = 40 mm
Disc material Acetal (POM), 1410 kg/m3 Aluminium, 2700 kg/m3 Steel, 7850 kg/m3
Pause X-ray overlay: on Quality: High Reset
The picture turns at the slow "shown rotation" rate so you can follow it; every load, power and efficiency readout uses the shaft speed in rpm.
Side load on the input tenon (cyan) and output tenon (amber) over one turn, N; white line = now
Peak side load 2 m e w^2 against shaft speed for the three materials, N (dot = now, same e and D)
Friction heat generated in the two slot pairs over one turn, W (dashed = cycle mean)
The science
Independent numerical checks