WATER HAMMER / COMPONENT EXPLORER

Inside the pressure pulse.

Inspect the pump assembly, isolate its valves and watch the water column transfer momentum into the delivery chamber.

MODEL STATUSTEXTBOOK + ILLUSTRATIVEInteractive 3D assembly
01 / ASSEMBLY VIEW

Hydraulic ram cutaway

ACCELERATINGt = 0.00 s
Water Pressure pulse Air
Y-UP / METRES / SCHEMATIC SCALE
ASSEMBLY PARTS01 Supply reservoir02 Drive pipe03 Waste valve04 Pump body05 Delivery check06 Air chamber07 Delivery riser
BODY PRESSURE0.0 kPainstantaneous gauge
DRIVE VELOCITY0.00 m/swater column
DELIVERY FLOW0.0 L/minthrough delivery riser
AIR PRESSURE0.0 kPachamber gauge
✓
INDEPENDENT CHECK / JOUKOWSKYAwaiting first valve closure

Δp = ρ a Δv · analytical pressure rise vs engine peak

CYCLE COUNT0valve closures
03 / MODEL NOTESThe science+

Water-hammer pressure

The ideal instantaneous pressure rise at valve closure is estimated with the Joukowsky relation:

Δp = ρ a Δv

Here ρ is water density, a is pressure-wave speed and Δv is the change in pipe velocity.

Air chamber compliance

Compression is represented by an isentropic gas relation, with net chamber inflow reducing the gas volume:

Pabs Vγ = constant

γ = 1.4 for the illustrative air model. A simplified outlet orifice releases water against the delivery lift.

What is simplified

The model uses a lumped drive-column inertia, Darcy friction, a threshold-triggered waste valve, an exponentially decaying pressure pulse and idealised valves. It does not resolve distributed water-hammer waves, pipe-wall viscoelasticity, valve impact mechanics, entrained air or detailed chamber geometry.

Textbook relations · Illustrative valve and damping behaviour · Scaled assembly