Electromagnetism · Process laboratory

Induction heating in a steel billet

3D · Thermal cutawaySeed 684921

Induction coil and radial thermal field

Explore the assembly, rotate the cutaway and run the heating cycle.

Y up · metresCutaway view
Thermal cutaway · radial temperature bands · scaled assembly
Ready · 0.0 s
Absorbed power
2.80 kW
Skin depth
0.168 mm
Mean billet temperature
20.0 °C
Surface temperature
20.0 °C
Independent power check · analytical input vs integrated radial source
Closed-form power / summed finite-volume source2.796 kW / 2.796 kW · 0.000%
The science · equations and assumptions
Electromagnetic heatingδ = √(2 / (ω μ σ))   ·   Rₛ = √(ω μ / (2σ)) Hᵣₘₛ = N I / ℓcoil   ·   Pabs = η Rₛ Hᵣₘₛ² (2πRL) Radial thermal diffusionρ cₚ ∂T/∂t = k (1/r) ∂/∂r (r ∂T/∂r) + q(r) −k ∂T/∂r |R = h (Tsurface − Tambient) The billet is represented by 24 concentric finite-volume rings. The same radial temperatures drive the 3D cutaway colours; the 3D scene is a visualisation of the 2D engine, not a separate physical model. Power deposition is normalized to the closed-form surface-resistance estimate. If skin depth is below one radial cell, the source profile is broadened to 0.4 cell width while conserving total power.

Simplifications: fixed steel properties, uniform axial field, side-wall convection only, no phase change, radiation, end effects, coil losses or temperature-dependent magnetic transition. Coupling factor η is illustrative. This is a textbook / illustrative / scaled model, not a process recipe.
Illustrative design, not affiliated with any real institution or manufacturer.
Made with 🤖 ChatGPT · Three.js