PROCESS ENGINEERING / EXHIBIT 07

Hydrocyclone particle separation

MODEL SEED 593817

CENTRIFUGAL CLASSIFICATION

Inside the separation zone

CUT-SIZE MODEL SN / RK4
Cut size · d₅₀89.1 µm50% grade efficiency
Solids recovery50.5%to underflow
Pressure drop75.5kPaacross the unit
Feed throughput36.5L/minliquid volume
01 / FLOW ARCHITECTURE Feed Overflow Underflow
OUTER VORTEX ↓ COARSE PARTICLESINNER VORTEX ↑ FINES

02 / CLASSIFICATION

Grade efficiency curve

η(d) · %

The cut size is the diameter at which half the particle mass reports to the underflow.

03 / OPERATING WINDOW

Cut size vs inlet velocity

d₅₀ · µm

A velocity sweep holds all other operating conditions constant.

THE SCIENCEEquations, assumptions & limits

Radial migration. Centrifugal buoyancy is balanced against spherical-particle drag. The drag coefficient uses the Schiller–Naumann correlation, with a high-Reynolds-number limit.

Fc = (ρp − ρf) · Vp · vθ² / r   =   FD

Cut size. d₅₀ is found by solving the radial migration-time integral across the active separation gap so that migration time equals axial residence time. The grade curve is a logistic partition with fixed sharpness 3.2.

η(d) = 1 / [1 + (d₅₀ / d)3.2]

Model scope. Illustrative reduced-order model: constant mean swirl speed, fixed geometry ratios, dilute spherical particles, a water-like carrier fluid (ρf = 998.2 kg/m³), and a log-normal mass-based feed distribution (geometric standard deviation 1.8). Turbulence, particle interactions, roping, air-core instability and non-Newtonian effects are omitted. Pressure loss uses fixed Euler number Eu = 4.2; the illustrative feed solids rate is 24 kg/h.

Illustrative design, not affiliated with any real institution or manufacturer.

Made with 🤖 ChatGPT