CENTRIFUGAL CLASSIFICATION
Inside the separation zone
02 / CLASSIFICATION
Grade efficiency curve
The cut size is the diameter at which half the particle mass reports to the underflow.
03 / OPERATING WINDOW
Cut size vs inlet velocity
A velocity sweep holds all other operating conditions constant.
THE SCIENCEEquations, assumptions & limits
Radial migration. Centrifugal buoyancy is balanced against spherical-particle drag. The drag coefficient uses the Schiller–Naumann correlation, with a high-Reynolds-number limit.
Fc = (ρp − ρf) · Vp · vθ² / r = FD
Cut size. d₅₀ is found by solving the radial migration-time integral across the active separation gap so that migration time equals axial residence time. The grade curve is a logistic partition with fixed sharpness 3.2.
η(d) = 1 / [1 + (d₅₀ / d)3.2]
Model scope. Illustrative reduced-order model: constant mean swirl speed, fixed geometry ratios, dilute spherical particles, a water-like carrier fluid (ρf = 998.2 kg/m³), and a log-normal mass-based feed distribution (geometric standard deviation 1.8). Turbulence, particle interactions, roping, air-core instability and non-Newtonian effects are omitted. Pressure loss uses fixed Euler number Eu = 4.2; the illustrative feed solids rate is 24 kg/h.
Illustrative design, not affiliated with any real institution or manufacturer.