FIELD ENGINEERING / 04
HYDRAULIC MACHINES · TRANSIENT FLOW
Water hammer · first-surge study

Hydraulic ram pump laboratory

Follow the pressure wave created when a waste valve snaps shut. Tune the drive line, then inspect the same scenario in a 3D cutaway.

01 / Hydraulic circuit

SCHEMATIC · NOT TO SCALE
FLOW DIRECTION → · PULSE TRAVELS ALONG DRIVE PIPE
Wave speed—m/s in pipe
Incident surge—bar gauge
Round trip—ms · 2L / a
Drive flow—L/s steady estimate
Chamber pressure—bar absolute

02 / Valve pressure trace

IDEALIZED FIRST-RETURN RESPONSE
Pressure rise · bar gaugeOne round trip: — ms
The science · equations, assumptions and independent checks
Elastic wave speed
a = √[(K / ρ) / (1 + KD / Et)]
Thin-wall elastic-pipe correction; wall thickness is estimated as 7.5% of internal diameter for this illustrative HDPE line.
Joukowsky surge
Δp = ρ a Δv · min(1, 2L / atc)
The finite-closure factor limits the instantaneous-closure result when the valve closes more slowly than one round-trip wave time.
Initial drive flow
v = √[2gH / (fL/D + Km)] · Q = vA
A steady Darcy–Weisbach estimate with fixed illustrative friction and minor-loss coefficients.
Air-chamber compression
P₁V₁γ = P₂V₂γ
The first-pulse volume is estimated as Q times the shorter of closure time and wave round-trip time. Compression is capped at 25% of gas volume.

Independent checks will appear here.

Limitations: this is a first-surge teaching model, not a full transient method-of-characteristics solver. It omits valve impact mechanics, distributed friction, cavitation, leakage, reservoir dynamics and the complete delivery-cycle efficiency. The pressure trace is a damped first-return illustration using the calculated round-trip period.

Illustrative design, not affiliated with any real institution or manufacturer.

Made with 🤖 ChatGPT · Three.js