Engineering / Energy storage

Hydraulic piston accumulator

Explore how a gas-charged piston stores hydraulic energy as oil enters the vessel. Adjust precharge, gas behaviour and fill fraction, then compare the live state with the full pressure–volume curve.

Accumulator cross-sectionTextbook model · live state
Upper chamber · compressed nitrogen (illustrative)Lower chamber · hydraulic oil
Pressure–volume and stored-energy laboratoryPolytropic sweep · 0–82% fill
Curves update with precharge, vessel volume and exponent.Current state: 45% fill
The science · equations, assumptions and independent check

The accumulator is represented as a gas chamber compressed by an oil-driven piston. The gas follows a polytropic relation. Gauge pressure is the absolute gas pressure minus atmospheric pressure.

Pg Vgn = constant
Pabs = P0,abs (1 − x)−n
Vg = V0(1 − x)

Stored hydraulic work is the integral of gauge pressure over admitted oil volume. For n ≠ 1, the engine uses the analytical polytropic integral; the page independently checks it with composite Simpson integration of the pressure curve.

W = V0 ∫₀ˣ (Pabs − Patm) dx
F = Pgauge A
dx/dt = Q / V0

Textbook: ideal-gas polytropic compression and quasi-static pressure. Illustrative: effective piston area is derived from a 1 m stroke; commanded flow directly changes fill fraction. Scaled: vessel geometry is visual and is not a manufacturing drawing. Real accumulators also involve seal friction, thermal transients, precharge tolerances, valve losses and pressure-vessel limits.

Illustrative design, not affiliated with any real institution or manufacturer.

Made with 🤖 ChatGPT