MySimulator / Science films
The gear trade-off
60-second mechanism study · seed 683251
HIGH QUALITY
Live model · The question
3.00:1 gear pair
Input speed90 rpm
Output speed30 rpm
Gear ratio3.00 : 1
Input torque1.20 Nm
Output torque3.06 Nm
Teeth · driver:driven12 : 36
ωout = ωin ÷ r · 30.0 rpm = 90 rpm ÷ 3.00
τout = τin × r × η · 3.06 Nm = 1.20 Nm × 3.00 × 0.85
11.3 W in → 9.6 W out · efficiency 85%
Can a small gear make a big wheel turn?
Try it yourself
The driven gear's tooth count, rotation, speed, torque, and equations all update from the same model. Efficiency stays at the illustrative 85% setting.
The science
Speed and tooth ratio
For two external gears, the speed ratio is the inverse of the tooth-count ratio:
ωout = ωin × (driver teeth ÷ driven teeth)
Torque and power
τout ≈ τin × r × η. Here, η = 0.85 is a fixed illustrative efficiency.
Power is torque multiplied by angular speed. Because the output turns more slowly, it can deliver more torque without creating energy. Losses mean output power is lower.
Assumptions and simplifications
- Two external spur gears; ideal tooth engagement and a fixed 12-tooth driver.
- Driven teeth are integer counts; selectable ratio steps are 0.25.
- Efficiency is fixed at 85%; real efficiency varies with load, speed, lubrication, alignment, materials, and wear.
- Stylised teeth are not involute CAD geometry and are not for fabrication.
- Visual rotation is slowed to 25% for clarity; equations use the full indicated RPM.