MEMBRANE SYSTEMS LAB
Electrodialysis · 2D transport laboratory
Textbook model / illustrative process
Cross-section + analytical sweep

Electrodialysis stack · salt transport

Cation-exchange membrane (CEM)Anion-exchange membrane (AEM)Diluate channelConcentrate channel
Outlet salinity
1.91g/L
Salt removed
3.09g
Current density
100A/m²
Specific energy
0.51kWh/kg
Nominal operating point · below limiting currentIndependent check: —
Current sweep · outlet salinityOther parameters held constant · textbook balance + illustrative limits
The science — equations, assumptions and limits
Textbook · Faraday transportṁₛ = η · N · I · Mₙₐ꜀ₗ · 60 / FSalt-equivalent transfer rate in g/min. η is current efficiency, N is cell-pair count, I is current, M is molar mass and F is Faraday's constant.
Illustrative · Limiting currentIeff = min(I, jlim · A)The transport model caps effective current when the imposed current density exceeds the selected limiting current density.
Textbook · Flow balanceCout = Cin − ṁₛ / QThe outlet salinity follows a steady salt balance. A 5% feed-supply reserve prevents negative concentrations.
Illustrative · Electrical loadVstack = N · (0.55 + 0.004j) ; P = Vstack · IA compact linearized voltage relation is used for teaching trends, not equipment sizing.

Simplifications: NaCl-equivalent salt, constant current efficiency, uniform membrane area, ideal mixing, no back-diffusion, water transport, fouling, temperature rise, or concentration polarization profile. The limiting-current cap is a simplified representation, not a membrane-specific correlation.

Readouts are labelled as textbook or illustrative where appropriate. The independent check compares a 240-step numerical accumulation with a separate closed-form Faraday calculation.

Illustrative design, not affiliated with any real institution or manufacturer.

Made with 🤖 ChatGPT