Loading 3D scene...

Telescopic Survey Mast

Tube material:
First sway mode:
Sway of the head: mean , peak (gust factor )
Buckling:
Base stress:
Tip-over:
Vortex-shedding wind speed:
Mast mass:
Quality:
The science

Structure. Three nested tubes (outer diameters 140, 110 and 85 mm, 3 m long each) slide out of a trailer-mounted socket. The mast is a cantilever clamped at the deck, modelled by 64 Euler-Bernoulli beam elements with the section changing stage by stage. In the overlap between two tubes the bending stiffness and mass of both tubes are added (this assumes the guide bushings pass shear, so it is an upper bound on stiffness). The camera head is a point mass at the tip.

Static wind sway. Wind follows a power law v(z) = v10 ((z + 0.9)/10)0.14. Each tube feels a drag line load q = ½ ρair Cd D v(z)2 with Cd = 1.2, and the head a point load ½ ρair (CdA = 0.09 m2) v2. The finite-element system K u = f gives the deflection; the axial load is added through the factor 1/(1 − P/Pcr).

Euler buckling. The weight of the head and of the tubes above each section compresses the mast. With the geometric stiffness matrix Kg the critical load comes from (K − λ Kg) φ = 0; λ is the load factor and Pcr = λ P. For a uniform fixed-free column this reduces to Pcr = π2EI/(4L2). A load factor below 1 means the mast would buckle.

Natural frequency and gusts. (K − ω2 M) φ = 0 (consistent mass matrix, payload at the tip) gives the first sway mode. The gust-driven response uses that mode as a single oscillator, M* η'' + 2 ζ ω M* η' + K* η = φTF (1 + I g(t))2, integrated with RK4, where g(t) is a fixed sum of six sinusoids with a −5/6 amplitude law and I is the turbulence intensity. Peak over mean is the gust factor.

Stress and tip-over. Base bending stress σ = Mb (D/2)/I (times the P-delta factor) + P/A, compared with a yield strength of 240 MPa (aluminium), 250 MPa (steel) or an illustrative 400 MPa allowable (carbon fibre). Wind overturning moment about the outrigger pads is compared with the restoring moment g (mtrailer + mmast + mhead) s/2 (trailer 150 kg, s the pad span); because the load scales as v2, vtip = v √(Mrest/Mwind).

Vortex shedding. The speed at which the shedding frequency St v/D (St = 0.2, top tube) meets the first mode is shown as a hint only: it is a few m/s or less for these masts, where the cross-wind force is tiny, so it is not simulated.

Honest simplifications. Single plane (along-wind) bending; round tubes with a fixed drag coefficient; no guy wires, no tube-to-tube clearance or slip, no ground flexibility, no torsion; gust time series is a deterministic stand-in for real turbulence; sway is drawn exaggerated (slider). Dimensions, masses, damping and material values are illustrative, not a design standard, and not for sizing real equipment. This is a civilian survey/weather/camera mast; the earlier unrelated "mechanical atlas" content was removed.

Running numerical checks...

Made with 🟠 Blender · Three.js