Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What is modelled
A lamp at the centre of a lantern room is surrounded by glass lens panels. Each panel is a Fresnel (bullseye) lens: the thick curved lens is cut into thin concentric prisms, so it bends light just as strongly but is light enough to turn. The lens collects light from a wide angle and sends it into a narrow beam; the whole assembly rotates, so a distant observer sees a flash each time a beam sweeps past. How far the flash can be seen depends on the lamp, the weather and the curvature of the Earth.
Equations
- Each ring of the lens is a prism whose tilt φ sends a ray from the focus out parallel to the axis. A ray from the focus hits the flat face at radius r with
sin α = n sin β,α = arctan(r/f), and leaves the tilted exit face whentan φ = n sin β / (n cos β − 1)(glass index n = 1.51, focal length f = 0.92 m, aperture radius 0.75 m). The rings in the 3D model are cut with exactly this slope. - A lamp of size s is not a point, so the beam spreads by
θ = s / f(full width at half intensity), with a Gaussian profileI(δ) = I0 exp(−4 ln 2 δ²/θ²). - The lens aperture shines with the luminance of the lamp (times the glass transmission τ), so the peak intensity is
I0 = L τ A, with A the lens area. The beam has a solid angle of aboutπθ²/(4 ln 2), which is why the intensity is a million times that of the bare lamp. - The lens turns at
ω = 2π/P; with N panels there is a flash everyP/N, and each flash lastsθ/ωat half intensity. - Allard's law gives the illuminance at distance d:
E = I e−σd / d², where the extinctionσ = 3.912 / Vfollows from the meteorological visibility V (the distance at which a dark object keeps 2 % contrast). A light is seen when E exceeds the night-time threshold of about 0.2 microlux. - Geographic range: with atmospheric refraction the horizon distance is
d = √(2 Reff h)withReff = R/(1 − k), k = 1/7, which is about3.86 √hkm (3.57 √h without refraction). The range for a lamp at height h1 and an eye at h2 is3.86(√h1 + √h2).
Checks run in the page
- Snell's law is traced through the glass for seven lens radii: a ray from the focus must leave parallel to the axis, and a source 15 mm off-axis must leave at about 15 mm / f.
- The horizon distance from exact circle geometry is compared with the 3.86 √h formula for three heights.
- A time-domain simulation of the rotating beam, sampled every half millisecond, is compared with the analytic flash interval, flash width and the Gaussian integral of the light.
Honest simplifications
- The lens is treated as a thin rotationally symmetric lens, with no aberration, dispersion or the vertical prisms of a real lens; real beams are also shaped differently in the vertical direction. The beam is Gaussian, without side lobes.
- Atmospheric extinction is a single exponential (no scattering back into the beam, no refraction layers or mirages), and the threshold illuminance is a single number; real thresholds depend on background light and the observer's adaptation.
- The observer ship on screen is a marker at a fixed picture distance; the real distance is the slider value. Horizon distance ignores waves, tides and the dip of the sea level below the lamp room except through the island height.
- The Blender model is a generic lighthouse, not a specific tower. Beams on screen are drawn with at least a minimum visible width.
What to try
- Make the source larger: the beam widens, the flash lengthens and the peak intensity at a distant ship falls.
- Choose the Fog bank preset: the visibility sets the range long before the horizon does. Then choose Ship over the horizon: no light is seen however bright the lamp, because the Earth curves away.
- Raise the island height and compare the geographic range curve with the luminous range.
- Switch between 1, 2 and 4 lens panels to see how the flash character (interval) changes at the same rotation rate.
Loading model...
Loading Blender model...