Cavitation & suction hydraulics
Centrifugal pump cavitation laboratory
Inspect the impeller, volute and suction path while changing the same operating conditions used by the 2D hydraulic model.
Cutaway pump assembly3D MODEL
Liquid flowRotating impellerVapour bubblesDrag to orbit · scroll to zoom
NPSH available
—m
NPSH required
—m
NPSH margin
—m
Pump head
—m
Shaft power
—kW
Vapour pressure
—kPa
Calculating operating condition
The science
Available NPSH is the absolute suction total head above the liquid vapour-pressure head. The model uses an open reservoir, suction lift and Darcy–Weisbach pipe losses.NPSHₐ = pₐₜₘ/(ρg) − pᵥ/(ρg) − zₗᵢft − hₗₒₛₛhₗₒₛₛ = (fL/D + K) · v²/(2g), Re = ρvD/μRequired NPSH follows an illustrative pump curve scaled with flow and rotational speed. Cavitation risk is indicated when NPSHₐ is at or below NPSHᵣ; actual manufacturer limits and transient effects are not represented.NPSHᵣ = 2.2 · (Q/60)² · (N/1450)²Pₛₕₐft = ρgQH / ηWater density, vapour pressure and viscosity vary with temperature. The pump head and efficiency curves are illustrative, not a certified performance map. All values use SI units internally. Illustrative design, not affiliated with any real institution or manufacturer.
The 3D assembly is a conceptual cutaway. Geometry and bubble density are illustrative visualisations of the shared hydraulic model.