Loading 3D scene...

Whip Crack

Cracker speed over time
Quality:
The science

The whip is a rope with mass per length μ(s) = ρ π r(s)², tapering exponentially from r = 12.5 mm at the handle to 0.8 mm at the cracker (3 m, 0.27 kg). It is simulated in a vertical plane as 60 lumped masses joined by stiff tension-only links (axial wave speed 2000 m/s, near inextensible), integrated with symplectic Euler at 6 µs steps:

mi ai = Ti êi - Ti-1 êi-1 - mi g + Fdrag, T = k (l - l0) + c · (relative speed), T ≥ 0, Fdrag = -½ ρair CD d l |vn| vn (CD = 1.2).

The handle end follows a prescribed arm swing (0.9 m arm, back-swing, forward cast, abrupt stop and a small snap-back). Nothing is fed in about the loop speed: the loop appears by itself and, because a travelling loop of speed v carries tension ≈ μ v² while the mass ahead of it shrinks, the energy of the whole whip concentrates into the last few grams, so the cracker can pass Mach 1 (343 m/s) and produces a small sonic boom. This is the mechanism measured with high-speed cameras (Goriely and McMillen 2002; Krehl et al. 1998).

The four checks: hanging-whip static tension against the weight below each segment, energy conservation of a drag-free swing, time-step convergence of the peak cracker speed, and the taper effect (same mass and hand motion, a uniform rope is about an order of magnitude slower).

Simplifications: motion confined to one plane, no bending stiffness or twist, hand path is a fixed arm swing not a real wrist flick, constant drag coefficient, no air compressibility or shock formation (the boom is drawn when the cracker speed crosses 343 m/s), the rope is stiff rather than leather. The peak cracker speed is very sensitive to the hand motion and resolution (the dt check typically differs by several percent), so treat the Mach number as an estimate; the qualitative result (tapered whips crack, uniform ropes do not) is robust. The whip is drawn thicker than life so the tip stays visible.

Running numerical checks...

Made with 🟠 Blender · Three.js