Loading 3D scene...

Blacksmith Forge

Controls and readouts
Temperature
Glow
Bar section
Strikes 0 ·
Radiation
Quality:
The science

Cooling. The bar is treated as one lump (uniform temperature, valid while the Biot number is small): ρcV dT/dt = −A [ h (T−Ta) + εσ(T4−Ta4) ]. Hot steel loses most of its heat by radiation (Stefan–Boltzmann), which is why a thin blade (large area per volume A/V) cools much faster than the fat starting bar.

Glow colour. Hot metal radiates like a blackbody (Planck's law); its peak wavelength is λmax = b/T (Wien). Steel starts to glow dull red near 525 °C and turns yellow-white above about 1200 °C, which is how smiths judge temperature by eye.

Forging. Metal below about 700 °C is too stiff to flow and a blow only chills it. Above that, the flow stress falls roughly exponentially with temperature, so each hammer blow gives a larger strain when the bar is hotter. Plastic flow conserves volume: the bar gets thinner (h) and wider (d) with h·d constant.

Simplifications: the flow-stress law, strain per blow and the 22 °C chill per strike are illustrative, not measured data; the length of the bar is fixed (real blows also lengthen it), the properties of steel are held constant (real c, ε change with temperature and phase), the forge is a first-order warm-up towards the coal temperature, and quenching and tempering are not modelled. Independent educational model.

Running numerical checks...

Made with 🟠 Blender · Three.js