Wrecking Ball Demolition (2D)

A side-view slice of the same idea as the 3D page: swing a ball into a wall and follow where every joule of energy goes.

Switch to 3D

Presets

Playback

Material

Ball and crane

Rope length and release angle set the impact speed v = sqrt(2 g L (1 - cos a)).

Wall

Bond strength scales the tensile strength of the mortar joints.

Layers

Model checks

The science

The swing

The ball hangs on an inextensible rope, so it has a single coordinate, the angle θ: m L2 θ'' = −m g L sinθ + (contact force) · (∂r/∂θ). With no wall the period is the exact elliptic-integral value T = 4 √(L/g) K(sin(θ0/2)) and the speed at the bottom is √(2 g L (1 − cosθ0)); both are checked against the simulation.

The wall

The wall is a lattice of disc-shaped blocks joined by springs along rows, columns and both diagonals, which makes the lattice rigid. A spring breaks when its tension exceeds S · A (the material tensile strength times the joint area); once a bond is gone only contact is left: a spring-dashpot normal force calibrated to the material restitution, and Coulomb friction with spin, so rubble slides and rolls. Every step is booked in an energy ledger: kinetic and potential energy of ball and blocks, elastic energy in springs and contacts, and the energy dissipated by damping, friction and broken bonds. Their sum must stay equal to the energy you started with.

Where does the energy go?

The Griffith surface energy of the new cracks, Gc × crack area, is only a few joules per joint here: fracture itself is cheap. Almost all the impact energy ends up as heat and sound in contacts and friction and as kinetic energy of flying debris, which is why a heavier, faster ball throws rubble farther without breaking many more bonds.

Honest simplifications: a 2D slice (the ball has a fixed width), blocks are discs, not bricks, no cracking inside a block, one effective bond stiffness (calibrated for stability, not the true Young's modulus), bond strengths are effective lattice values (glass is flaw-limited, far below its ideal strength), strong rolling resistance on the ground to mimic flat faces, no air, no spin of the ball, and no structural frame. Demolition of real buildings needs engineering supervision; this is an educational model of an inanimate wall only.

What to try
  • Run Light ball, tiny swing: the bonds stretch and the wall survives.
  • On the brick wall raise the release angle until the first bonds break, then watch the crack grow.
  • Switch on Colour blocks by fragment to count the pieces; try the thin glass pane.
  • Look at the ledger graph: the green sum should lie on top of the dashed potential-energy line.
Energy ledger
Contact force on the ball
Fracture progress