Presets
Playback
Apparatus
Model checks
The science
What is modelled
A small platen press closes a hinged platen on a forme through a short coupler driven by a flywheel crank. Near the dead centre the coupler folds onto the crank, so a small torque produces a very large force. The paper and the frame compress like springs, and the ink film splits half and half at every roller nip before part of it is pressed onto the paper.
Equations
- Four-bar loop
|P(θ) − A(φ)| = L; at the dead centredφ/dθ → 0, so torqueτ = F ℓ |dφ/dθ| / ηis small while the force is large. - Paper
p(δ) = −pk ln(1 − δ/δm); frameδpaper + F/kf = ε,F = A p. - Work
W = A pk δm[(1 − x)ln(1 − x) + x] + F²/(2kf)withx = δ/δm. - Ink
hn = s(hr + hn−1)sohn = hr s/(1 − s) (1 − sn)with s = 1/2; paper filmhp = ½(1 − e−p/0.8) hn; densityD = 1.55 (1 − e−hp/0.9).
Checks run in the page
- Ink film iteration against its closed form.
- Frame and paper equilibrium residual and force.
- Stroke work by integrating force over distance against the analytic energy.
- Four-bar closure over a full turn and the vanishing velocity ratio at the dead centre.
Honest simplifications
Paper and frame constants are typical values, not those of a measured press. The density and squash laws are simple saturating forms chosen to behave like real inks. Type is drawn the right way round, whereas real type is cut as a mirror image. This is educational only: a real platen press can crush fingers.
What to try
- Press Kiss impression to see too little pressure give a pale print with almost no relief.
- Press Over-inked squash: a thick film on smooth card spreads beyond the edges of the type.
- Press Big forme, same setting and notice that the force rises with the inked area at the same pressure setting.