Slope Stability

2D companion of the slope sim: a soil layer on a sloping rock bed, the force balance on one slice, and how rain lifts the water table until the factor of safety drops below 1.

Switch to 3D

Presets

Playback

Apparatus

Model checks

The science

What is modelled

A uniform soil layer of thickness z lies on a rock bed that dips at angle β. A long thin slice is held back only by shear strength along its base. Rain infiltrates, a water table builds up to a fraction m of the layer thickness, and the water pressure at the base reduces the effective normal stress, so the strength falls while the driving shear stays the same.

Equations

  • Driving shear stress τ = γ z sinβ cosβ
  • Normal stress σ = γ z cos²β, pore pressure u = m γw z cos²β
  • Mohr-Coulomb strength τf = c' + (σ − u) tanφ'
  • Factor of safety FS = τf / τ; sliding when FS < 1
  • Water storage n z dm/dt = I − Kd m (rain I, drainage Kd, porosity n = 0.4), steady value m = min(1, I/Kd)

Checks run in the page

  • A force-polygon calculation on one slice against the closed form for FS.
  • The critical angle of a saturated cohesionless slope, found by bisection, against tanβ = (γ'/γ) tanφ'.
  • The critical depth for FS = 1 by bisection against zc = c' / (γ cos²β (tanβ − tanφ')).
  • A numerical integration of the water-table equation against its exponential solution.

Honest simplifications

The slope is infinitely long, seepage is parallel to the slope, strength parameters are constant and the slide does not change them (no residual strength, no suction, no rate effects). Real landslide design uses limit-equilibrium methods on measured profiles and monitoring.

What to try
  • Press Heavy storm and watch the water table climb and FS cross 1.
  • Press Cohesive clay and see how cohesion allows a steep slope only while the soil is thin.
  • Move the slope angle past the friction angle in the dry case to see FS drop under 1 without any rain.
Factor of safety and water-table ratio against time
Factor of safety against slope angle (dry, now, saturated)
Mohr-Coulomb envelope and stress state at the base
Factor of safety against soil depth