Fluid machinery / learning laboratory
PUMP SYSTEMS LABORATORY
Textbook equations · illustrative pump curve
Cavitation & suction hydraulics

Centrifugal pump cavitation laboratory

Explore how suction-line losses, water temperature, lift and rotational speed change the margin between available and required net positive suction head (NPSH).

Hydraulic path & operating envelopeLive cross-section + NPSH sweep
NPSH availableNPSH requiredCavitation regionModel curves are illustrative
NPSH available
—m
NPSH required
—m
NPSH margin
—m
Pump head
—m
Shaft power
—kW
Vapour pressure
—kPa
Calculating operating condition
The science
Available NPSH is the absolute suction total head above the liquid vapour-pressure head. The model uses an open reservoir, suction lift and Darcy–Weisbach pipe losses.NPSHₐ = pₐₜₘ/(ρg) − pᵥ/(ρg) − zₗᵢft − hₗₒₛₛhₗₒₛₛ = (fL/D + K) · v²/(2g),   Re = ρvD/μRequired NPSH follows an illustrative pump curve scaled with flow and rotational speed. Cavitation risk is indicated when NPSHₐ is at or below NPSHᵣ; actual manufacturer limits and transient effects are not represented.NPSHᵣ = 2.2 · (Q/60)² · (N/1450)²Pₛₕₐft = ρgQH / ηWater density, vapour pressure and viscosity vary with temperature. The pump head and efficiency curves are illustrative, not a certified performance map. All values use SI units internally. Illustrative design, not affiliated with any real institution or manufacturer.
2D mode adds a live operating-envelope sweep and CSV data export. Share a scenario by copying the page URL.
Made with 🤖 ChatGPT