Energy systems / interactive field lab

Seebeck conversion · constant-property model

Thermoelectric generator load matching

Explore how a temperature difference drives current through a thermoelectric module, and why maximum electrical power occurs when the external load matches the module resistance.

TEXTBOOK MODEL · ILLUSTRATIVE SCALE
Module cross-section
Live thermal and electrical flow
Hot sideCold sideElectrical output
P-type / N-type legsΔT 150 K
Heat flows hot → coldCharge carriers drive external load
Open-circuit voltage
—V
Load voltage
—V
Output power
—W
Heat input
—W
Thermal efficiency
—%
Load matching curve
Electrical power vs external resistance
P · W
The marker is the selected load. The peak occurs at RL = R for this constant-property model.
Conversion efficiency
Efficiency vs external resistance
η · %
Efficiency depends on electrical loading and on the heat conducted directly through the module.
Independent check—
The science · equations and assumptions

Governing equations

Voc = α( Th − Tc )
I = Voc / (R + RL) · P = I² RL
Qh = α ThI − ½I²R + KΔT
Qc = α TcI + ½I²R + KΔT · η = P/Qh

What is represented

α is the total module Seebeck coefficient, R is its internal electrical resistance, K is its thermal conductance, and RL is the external load. The model assumes steady state, constant properties and equal splitting of Joule heat between the two faces.

What is simplified

Temperature-dependent material properties, Thomson heating, contact resistances, heat-exchanger losses, parasitic wiring and spatial temperature gradients are omitted. The visual dimensions and material colours are scaled and illustrative, not a manufacturing drawing.

Model label: textbook / illustrative / scaled. Independent electrical power and energy-balance checks are shown above.

Made with 🤖 ChatGPT