Energy systems · Science lab
Interactive scientific laboratory
SEED 614829
Thermoelectric conversion · 2D analytical lab

Thermoelectric generator load and heat-flow laboratory

Explore how a temperature difference becomes electrical power, and why the external load changes current, voltage, heat flow and conversion efficiency.

CONSTANT-PROPERTY MODELLIVE LOAD SWEEP
Module cross-section
Thermal path and electrical series path · schematic, not to scale
LIVE
Hot sideCold sideCurrent pathIllustrative schematic
Open-circuit voltage
8.00V
Vₒc = α ΔT
Load current
2.00A
I = Vₒc / (Rᵢ + Rₗ)
Electrical output
8.00W
P = Vₗ I
Conversion efficiency
—%
η = P / Qₕ

Load-matching sweep

Electrical power across external-to-internal resistance ratio

Independent energy checks

Separate identities checked against the engine result

CONSISTENT
Load power from V × I8.000 W
Load power from I²Rₗ8.000 W
Heat balance Qₕ − Q꜀8.000 W
Sweep maximum / closed-form maximum8.000 / 8.000 W
The electrical identity and heat-balance identity should agree to numerical precision. The maximum-power reference is the analytical matched-load result.
The science · equations, assumptions and scope

Governing equations

Vₒc = α (Tₕ − T꜀)
I = Vₒc / (Rᵢ + Rₗ),   Vₗ = I Rₗ
Qₕ = α Tₕ I − ½ I²Rᵢ + K ΔT
Q꜀ = α T꜀ I + ½ I²Rᵢ + K ΔT
P = Vₗ I = I²Rₗ,   η = P / Qₕ

Model scope

Textbook / illustrative / scaled. The module is represented by constant effective Seebeck coefficient α, electrical resistance Rᵢ and thermal conductance K. The hot and cold face temperatures are prescribed boundary conditions.

Temperature-dependent material properties, contact resistances, radiation, Thomson heating, parasitic wiring and spatial temperature gradients are omitted. The cutaway is a teaching schematic, not a product specification.

Illustrative design, not affiliated with any real institution or manufacturer.

Made with 🤖 ChatGPT · Three.js