Energy conversion labPiezoelectric cantilever · 3D assembly
Scaled assemblySeed 482731
Piezoelectric cantilever assemblyNamed components · dynamic first-mode deformation · orbit camera
Scaled3D scene
3D assembly · eased camera introduction
Tip displacement amplitude
0.98mm
Steady-state harmonic fit
Piezoelectric voltage
12.21V
Across the load
Average load power
0.110mW
Mean of v² / R
Undamped natural frequency
16.27Hz
From √(k / m) / 2π
Independent analytical checkTime-domain RK4 amplitude compared with the closed-form harmonic solution.
ΔX 0.27% · ΔV 0.03%
The science

Coupled equations

m ẍ + c ẋ + kx + θv = −m a(t)
Cₚ v̇ + v/R − θẋ = 0
a(t) = A sin(2πft)

What is modelled

A linear, single-mode cantilever coupled to a piezoelectric capacitance and a purely resistive load. The electrical power is averaged as v²/R over the final four cycles.

What is simplified

Beam geometry is reduced to its first bending mode. Material hysteresis, higher modes, nonlinear strain, rectifiers and real circuit parasitics are omitted. Parameters are illustrative, not a product specification.

Made with 🤖 ChatGPT · Three.js