PV
PHOTOVOLTAIC ENGINEERINGSemiconductor physics · I–V curves · MPPT
8 interactive laboratories
MySimulator scientific family

Photovoltaic Module Engineering

Explore the single-diode model from semiconductor junction behaviour to solar-array configuration, MPPT control and daily energy yield.

Shared scientific model

The family uses one parameterized single-diode equivalent circuit. Every laboratory can import the same irradiance, cell temperature and electrical parameters through a shared scenario link.

Core equationI = Iph − Id − Ishimplicit diode model
Electrical solverBisectionmonotone root solve
MPP solverGolden sectionbounded optimization
External dependenciesNoneoffline HTML / JS
01 · Semiconductor physics

Junction cross-section

Visualize the illuminated p–n junction, conceptual carrier separation and operating point.

Open laboratory →
02 · Electrical characterization

I–V and P–V graphs

Inspect current, voltage, power, fill factor and maximum power point.

Open laboratory →
03 · Experimental method

Controlled experiment bench

Run irradiance sweeps, record measurements and export a CSV log.

Open laboratory →
04 · Power engineering

Array configuration

Build series and parallel combinations of identical PV modules.

Open laboratory →
05 · Model interpretation

Parameter explorer

Test the influence of Rs, Rsh and diode ideality on the I–V response.

Open laboratory →
06 · Control systems

MPPT challenge

Track a changing maximum-power point with perturb-and-observe control.

Open laboratory →
07 · Energy systems

Daily energy yield

Convert a daylight irradiance profile into array power and daily energy.

Open laboratory →
08 · Data science

Measurement analysis

Generate synthetic measurements, fit Rs and Rsh, and inspect residuals.

Open laboratory →
Made with 🤖 ChatGPT