PV
MYSIMULATOR / ENERGY SYSTEMSPhotovoltaic conversion laboratory · offline edition
8 working laboratoriesSingle-diode modelOffline-ready
SCIENTIFIC SIMULATION FAMILY · 08 MODULES

Photovoltaic energy conversion laboratory

Explore semiconductor conversion, electrical characteristics, maximum power tracking, operating-condition sensitivity and array design. All modules use one shared scientific engine and can exchange the current scenario through navigation links.

Shared model at a glance

Default STC reference
Irradiance1000W/m²
Cell temperature25°C
Reference Voc40.0V · 60 cells
Reference Isc9.50A

Reference electrical parameters are calibrated to Isc = 9.50 A and Voc = 40.0 V at 25 °C and 1000 W/m² for the default 60-cell module. The model is educational, not a manufacturer datasheet.

LAB 01

PV cross-section

Explore the module stack, photon absorption and charge collection pathway.

Open laboratory →
LAB 02

I–V & P–V characteristics

Plot current, voltage and power; identify the maximum power point.

Open laboratory →
LAB 03

MPPT experiment bench

Run a perturb-and-observe controller through a simulated cloud transient.

Open laboratory →
LAB 04

Operating conditions comparison

Compare irradiance and temperature scenarios and transfer one to the shared model.

Open laboratory →
LAB 05

Mathematical model explorer

Sweep physical and electrical parameters to study model sensitivity.

Open laboratory →
LAB 06

Diagnostic challenge

Infer hidden irradiance and cell temperature from an I–V trace.

Open laboratory →
LAB 07

Data analysis & report

Inspect metrics, sampled data, and export CSV or JSON results.

Open laboratory →
LAB 08

PV array designer

Configure series/parallel strings and match a resistive load.

Open laboratory →
Made with 🤖 ChatGPT