MYSIMULATOR / SCIENTIFIC SIMULATION FAMILY

Packed-Bed Thermal Energy Storage

Thermal front propagation, charging, reverse-flow discharge and engineering dispatch. Eight complementary laboratories connected by one shared scientific model.

OFFLINE-READY · 8 MODULES
THERMAL ENERGY STORAGE / SCHUMANN MODEL

Store heat. Track the front. Recover useful energy.

Explore a porous bed of solid particles charged by hot air. The numerical engine resolves fluid and solid temperatures separately, transports the fluid enthalpy conservatively, accounts for interphase exchange and integrates heat loss through the vessel wall. Use the same operating scenario across every module.

2TCoupled fluid + solid temperatures
1DAxial finite-volume model
8Interactive laboratories
CSVExportable experimental data

Shared scenario controls

Set a common starting scenario. Your settings are saved locally when available and embedded in module navigation links for reliable scenario transfer.

Current model: 3.0 m bed length · 1.0 m vessel diameter · 32 axial cells · air as heat-transfer fluid · granular solid storage medium.
EIGHT CONNECTED EXPERIENCES

Choose a laboratory

All modules run locally in your browser
MODULE 01

Cross-section laboratory

Visualize the packed vessel, particle bed, airflow and evolving solid-temperature field.

OPEN LABORATORY →
MODULE 02

Breakthrough graphs

Plot outlet breakthrough curves and inspect axial profiles at selected times.

OPEN LABORATORY →
MODULE 03

Charge & discharge

Run the bed in real time and reverse the flow to recover stored thermal energy.

OPEN LABORATORY →
MODULE 04

Scenario comparison

Compare baseline, higher flow, smaller particles and improved insulation.

OPEN LABORATORY →
MODULE 05

Mathematical model explorer

Explore the Schumann equations, derived coefficients and local equilibration.

OPEN LABORATORY →
MODULE 06

Engineering challenge

Find an operating point that meets high-temperature heat-delivery targets.

OPEN LABORATORY →
MODULE 07

Data analysis & report

Close the energy balance and calculate recovered heat and cycle efficiency.

OPEN LABORATORY →
MODULE 08

Sensor tomography

Reconstruct the thermal front from virtual thermocouples and estimate h.

OPEN LABORATORY →
Made with 🤖 ChatGPT