GGEOTHERMALBOREHOLE LABORATORY
OFFLINE SCIENCE SUITE8 MODULES
MYSIMULATOR / ENGINEERING COLLECTION

Ground heat exchange, from first principles

Explore how a vertical borehole heat exchanger interacts with surrounding ground. Change geological properties, design loads, borehole resistance and operating schedules. Every laboratory uses the same transient radial finite-volume model, so a saved scenario can be carried from one experiment to another.

Shared model1D radial heat flowTransient cylindrical conduction
Numerical methodFV implicitBackward Euler time stepping
Laboratories08 modulesComplementary learning formats
Dependencies0 externalNo backend or paid API
LAB 01 / FIELD VIEW

Borehole cross-section

Inspect the U-tube, grout, borehole wall and radial ground-temperature field.

Open laboratory →
LAB 02 / RESPONSE

Thermal response graphs

Track wall and mean-fluid temperatures as the ground responds to a heat load.

Open laboratory →
LAB 03 / EXPERIMENT

Thermal experiment bench

Run extraction, idle and injection phases with a user-defined load schedule.

Open laboratory →
LAB 04 / COMPARISON

Geology and design comparison

Compare conductive ground, thermal capacity and borehole resistance scenarios.

Open laboratory →
LAB 05 / MATHEMATICS

Mathematical model explorer

Explore diffusivity, diffusion length, cylindrical resistance and grid convergence.

Open laboratory →
LAB 06 / CHALLENGE

Thermal design challenge

Find the maximum extraction load that keeps fluid temperature above a limit.

Open laboratory →
LAB 07 / DATA

Field data analysis and report

Fit conductivity and borehole resistance to a synthetic field-response dataset.

Open laboratory →
LAB 08 / SEASONAL

Seasonal recovery planner

Study how rest periods and heat injection restore the ground after extraction.

Open laboratory →

Shared scientific convention

SI units
∂T/∂t = α · (1/r) · ∂/∂r (r · ∂T/∂r)

The ground is represented as homogeneous cylindrical soil around a long vertical borehole. A prescribed line load is applied at the borehole wall; the far-field boundary is held at the undisturbed ground temperature.

Tfluid = Twall + q′ · Rb

Positive q′ means heat is extracted from the ground into the fluid. Negative q′ means heat is injected into the ground. Fluid temperature is the modelled mean loop-fluid temperature, not a separately resolved inlet/outlet pair.

Made with 🤖 ChatGPT