Floating Wind Platform

2D side view of a spar-buoy floating turbine: ballast sets draft and metacentric height, wind thrust heels the spar, waves drive heave and pitch.

Switch to 3D

Presets

Playback

Apparatus

Model checks

The science

What is modelled

A slender hollow spar floats with a dense ballast column in its lower part. The ballast sets the draft through Archimedes' principle and pulls the centre of gravity far below the centre of buoyancy, which gives a positive metacentric height GM and a stable upright position. The rotor thrust heels the spar until the buoyancy restoring moment balances it. Waves push the hull up and down and rock it, and each motion is a damped oscillator with its own natural period.

Equations

  • Draft d = m / (ρ A), with water-plane area A = πD²/4.
  • Metacentric height GM = KB + BM − KG, KB = d/2, BM = D² / (16 d), KG from the masses and their heights.
  • Rotor thrust T = ½ ρa Ar CT v² (constant CT below rated wind, falling above it, feathered above cut-out).
  • Static heel tanθ = T ℓ / (ρ g ∇ GM).
  • Heave (m + ma) x'' + c x' + ρ g A x = ρ g A e−kd (H/2) cos ωt, natural period 2π √((m + ma)/(ρ g A)).
  • Pitch (I + Ia) θ'' + cθ θ' + ρ g ∇ GM sinθ = Mwave cos ωt + T ℓ cosθ, with wave moment from Morison inertia forces on strips.

Checks run in the page

  • The heave free-decay period from a time integration against the closed form.
  • The pitch free-decay period against the closed form.
  • The steady heel from a long run against the static formula, and the heave amplitude in waves against the frequency response.

Honest simplifications

Linear wave theory, one regular wave, small mooring stiffness left out, constant added mass from a disk approximation, damping given as a single ratio, no wind turbulence and no control system. Real designs use coupled aero-hydro-servo-elastic codes and model tests.

What to try
  • Press Light ballast and watch GM shrink and the heel grow under the same wind.
  • Press Heave resonance and raise the wave period toward the heave natural period.
  • Press Storm and compare the heel at rated wind with the heel above cut-out.
Heave amplitude per metre of wave against wave period
Steady heel angle against wind speed (rotor thrust)
Heave and pitch against time
Metacentric height and draft against ballast fill