Phased Array Antenna: Electronic Beam Steering, Grating Lobes and Taper

Steer the beam of an N x N patch array by phasing its elements: see the 3D radiation pattern, the side lobes, the grating lobes that appear when the spacing is too wide, and the gain lost when you scan far from boresight.

Switch to 2D

Presets

Playback

Taper

Parameters

Camera

Layers

Quality

Model check

The science

What you see. A flat array of N × N patch antennas on a mast, working at 3 GHz (wavelength 99.9 mm). The glowing colour on each patch is the phase of its signal; the coloured balloon in front is the radiation pattern (distance from the array = relative power in decibels, from −40 dB to the peak). The yellow dot is the direction the beam is steered to, with a small receiving horn on a stand placed there.

Beam steering. Every patch radiates the same signal with its own phase. In direction (θ,φ) the contribution of element (m,n) arrives with the extra path phase k d (m u + n v), where u = sinθ cosφ, v = sinθ sinφ, k = 2π/λ and d is the spacing. The array factor is AF = ΣΣ am an exp{ j k d [m(u − u0) + n(v − v0)] }. Feeding element (m,n) with the phase −k d (m u0 + n v0) makes all terms add up at (u0, v0): the beam turns electronically, without moving the antenna. The radiated power is P = cosθ · |AF|2 (a patch on a ground plane radiates only into the front hemisphere), and the directivity is D = 4π Pmax / ∫P dΩ, found by numerical integration.

Grating lobes, taper and shifters. The array only samples the wave at spacing d, so beams repeat when sinθ = sinθ0 − kλ/d; a second full-strength beam enters real space as soon as d (1 + |sinθ0|) > λ. That is why arrays use d ≤ λ/2 when they must scan far. An amplitude taper (Hamming, Blackman) lowers the side lobes at the price of a wider beam and less gain. Real phase shifters have only b bits, so phases are rounded to steps of 360°/2b; the rounding error forms periodic quantisation lobes.

Honest simplifications. Elements are identical and non-interacting: there is no mutual coupling, which in a real array changes the element pattern as the beam scans (and can even blind an array at some angles); the patch pattern is a simple cosθ power law, not a cavity-model result; there are no feed-network losses, no bandwidth effects (the model is a single frequency, so true-time-delay versus phase-shift squint is not shown), and no noise or manufacturing errors. The −40 dB floor of the balloon is a display choice. The geometry is drawn schematically: the housing grows with the number of elements and the receiving horn is only a marker for the beam direction.

Checks. (1) The Parseval identity: the mean of |AF|2 over a full phase period equals the sum of squared weights. (2) The half-power beamwidth of a uniform 16-element line against 0.886λ/(Nd). (3) The position of the grating lobe against the lattice law. (4) The directivity integral done two ways: over the sphere, and over the disc of direction cosines (u,v), where the cosθ element pattern cancels the Jacobian exactly.

Loading model...
Loading Blender model...
Pattern in the steering plane (dB)
Pattern around the beam cone (dB)
Peak gain against steering angle
Made with 🟠 Blender · Three.js