Trace bar-magnet field lines (Gilbert two-pole model), watch compass needles align, or switch to a current-carrying wire and launch charged particles that curve under the Lorentz force.
The science
Bar magnet (Gilbert model). Outside the magnet the field is modelled as that of two magnetic "charges" of strength ±qm at the ends: B(r) = (μ0/4π) qm r̂ / r². The sliders set the field of one pole at 10 cm, Bp, so B = Bp (0.1 m / r)². A field line is a curve everywhere tangent to B; it is traced here with 4th-order Runge-Kutta steps along dx/ds = B/|B| starting on rings around each north pole and ending when it falls into a south pole.
Compass. A needle of magnetic moment m feels the torque τ = m × B, giving θ'' = −ωn² sin(θ−θB) − 2ζωnθ' with ωn² ∝ |B|. It oscillates and settles along the local field line; the Earth slider adds a uniform background field, which creates a neutral point (B = 0) where the magnet's field cancels it.
Wire and particles. A long straight wire carrying current I produces B = μ0I / (2πd) (into the page on one side, out on the other). A charge moves by m dv/dt = q v × B; speed is constant and the path is a circle of radius r = mv/(|q|B), which shrinks near the wire, so the path drifts sideways (a cycloid-like curve). Integration uses the Boris scheme, which conserves speed exactly. Electrons and positrons curve opposite ways. Real particle speeds of 106 m/s are shown in slow motion.
Honest simplifications. Real magnets are dipole-like with field also inside the material (the Gilbert point-pole picture is only valid outside); the view is a single plane through the axis; the wire is infinite and thin (field capped at 2 mm); no relativity, radiation or collisions. The numerical checks listed under the controls (Biot-Savart vs formula, dipole limit, Gauss's law for magnetism, gyroradius) run at page load.