Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What is modelled
A beaver dam turns a stream into a pond. The water that was racing downstream now stays for hours or days, so particles settle out and bacteria in the muddy bottom remove nitrate (denitrification). This page models those two ecosystem services for a dam on a gentle valley: how big the pond becomes, how long water stays in it, and how much nitrate and sediment it removes at base flow and during a storm. It is a water-quality model of the pond, not of beaver behaviour.
Equations
- Valley cross-section: flat bottom of width b0 = 10 m with banks sloping 10 m horizontally per metre of height. Area
Ax(y) = b0 y + zs y^2. With bed slope S a pond that is h deep at the dam reaches backLp = h / S. - Volume and surface area:
V(h) = (b0 h^2/2 + zs h^3/3) / S,A(h) = (b0 h + zs h^2) / S. - Spillway: broad-crested weir over the crest of length
Lc = b0 + 2 zs Hd:Q = Cw Lc H^1.5,Cw = (2/3) Cd sqrt(2 g),Cd = 0.55,Hthe water height over the crest. - Level-pool routing during the storm:
A(h) dh/dt = Qin - Qout(h). The storm hydrograph is a gamma-shaped pulse starting at hour 12 with its peak 3 hours later. - Mixing: N equal tanks in series. For tank i,
d(Vt C_i)/dt = Q_(i-1) C_(i-1) - Q_i C_i - k Vt C_i. At steady stateCout = Cin / (1 + k tau / N)^Nwithtau = V/Q. - Nitrate loss: first order,
k = k20 theta^(T-20)with theta = 1.06 (field values of a few tenths per day are common in wetlands, so 0.3 per day is a plausible default, not a measurement). - Sediment: three classes (clay 2 um, silt 20 um, fine sand 100 um, density 2650 kg/m3). Stokes settling speed
vs = d^2 (rho_s - rho_w) g / (18 mu(T)); the loss rate in the pond isvs / mean depth, which is the Camp-Hazen picture of an ideal settling basin. Storm sediment concentration follows a rating curveC ~ Q^1.4.
Checks run in the page
- The closed-form pond volume equals a Simpson integral of the cross-section along the pond.
- Level-pool routing at constant inflow settles at the level given by the weir equation.
- The dynamic tank chain reaches the steady-state formula Cin / (1 + k tau / N)^N.
- The Stokes speed of a 20 um silt grain matches a hand calculation (0.36 mm/s).
- Mass of nitrate and silt is conserved over the 96 h storm run (in = out + lost + stored).
Honest simplifications
- The valley is a straight prism with constant slope, no side tributaries and no seepage through the dam; real dams leak and change shape, and real pond bottoms are uneven.
- Tanks in series stand in for real mixing (short-circuiting, dead zones). The loss rates and the nitrate rate constant are illustrative round numbers; measured values differ widely between ponds, seasons and organic matter supply.
- Particles are assumed to settle at their Stokes speed in still water (no turbulence, no flocculation, no resuspension) so clay is hardly trapped.
- Trapping is reported for steady base flow; storms are shown with the full dynamic run. Trees, reeds and beavers are decoration and carry no model.
- Not a design tool: it does not predict flood risk or dam safety.
What to try
- Raise the dam on a gentle slope: volume grows roughly with the cube of depth, residence time lengthens and nitrate removal rises (graph 2).
- Switch to cold water: the nitrate rate falls by about a factor of two and removal drops.
- Look at graph 3: silt and sand are trapped almost fully while clay passes through.
- Run the flashy storm: the pond rises, residence time shrinks and the outflow concentration shifts.
Loading model...
Loading Blender model...