Shoreline retreat, Bruun rule. A sea-level rise S moves the whole active beach profile landward and upward:
R = S * L* / (B + h*)
S = rate * years; L* = 500 m active width; B = 2 m berm; h* = 8 m closure depth
example: S = 0.5 m gives R = 0.5 * 500 / 10 = 25 m
Storm run-up, Stockdon et al. (2006), 2% exceedance, with deep-water wavelength L0 = g T^2 / 2 pi and foreshore slope beta:
R2% = 1.1 * ( 0.35 beta sqrt(Hs L0) + 0.5 sqrt( Hs L0 (0.563 beta^2 + 0.004) ) )
example: Hs 2 m, T 10 s, beta 0.05 gives R2% = 1.05 m
A segment is overtopped in a storm when still-water level (sea-level rise + tide + surge) plus run-up exceeds its dune crest. Storms arrive as a Poisson process (mean one per 1.5 years) with exponential surge (mean 0.5 m). Adaptation measures (dune building, living shoreline, setbacks) multiply retreat by (1 - e), run-up by (1 - e/2), raise the crest by 0.5 e metres, and let the crest keep pace with a fraction e of the sea-level rise (an unprotected dune does not grow, so its crest sinks by S relative to the sea). A segment counts as resilient if it was overtopped in fewer than 10% of storms and retreated less than 60 m.
- Colours: blue = sea, sand = beach, olive = dune, green = protected dune or living shoreline, brown-green = low hinterland, cyan = flooded during a storm.
- Vertical scale is exaggerated about 8 times so a 2 m berm is visible next to 50 m cells.
Honest simplifications. The Bruun rule is a one-dimensional equilibrium idealisation (no longshore sediment transport, no storm erosion, no sediment supply, no subsidence). Sea-level rise is linear. Surge, run-up and overtopping are screening-level, not a hydrodynamic model (no XBeach or SWAN). Segment properties are synthetic. This is a planning illustration, not an engineering assessment.