Presets
Playback
Haul and demand
Distance, truck load, growth and product lifetime.
Recovery routes
How collected material is split.
Material
Sets illustrative emission factors and recycling yield.
Transport mode
Lorry, rail or ship.
Camera
Quality
Layers
Model checks
The science
A stock-and-flow model of one material loop
Products enter use at the demand rate D and leave it after a spread of lifetimes (four Erlang stages with mean L), so the in-use stock obeys Little's law, S = D · L. A share c of end-of-life material is collected; the rest is lost. Collected material is split into reuse or repair (share a, success rate ρ; failures go to recycling), remanufacture (share b, material loss m) and recycling (the remainder, yield y). What is recovered replaces virgin input: V = D − recovered. In steady state without growth the closed form is V = D (1 − c [aρ + b(1−m) + ((1−a−b) + a(1−ρ)) y]) and the page checks the time-stepped run against it, together with an exact mass balance.
Circularity and carbon
The Material Circularity Indicator follows the Ellen MacArthur Foundation idea: MCI = 1 − LFI · 0.9 / X with linear flow index LFI = (V + W) / 2D and utilisation X = (L / Lref) · intensity, clamped to 0..1; here the waste of recycling processes is folded into W. Carbon compares a linear economy (all virgin input, all end-of-life to landfill) with the loop: virgin production, reuse, remanufacture and recycling processes, landfill and transport. Transport is kt × km × (kg CO2e per t-km); a lorry is taken as 0.8 kg CO2e per km shared over its load, rail 0.022 and ship 0.012 kg per t-km. The break-even haul distance is where the saving reaches zero, d* = S0 / (C · emission factor).
Honest simplifications: one aggregate material per run; no quality loss (downcycling) beyond the yield; recovered material is used the moment it is available; demand is exogenous; the emission factors of the material presets, the transport factors and the lifetimes are illustrative round numbers of the right order of magnitude and should be checked against a life-cycle database before use; the lorry count in the 3D scene is a visual representation of the accounted trips, and the model accounts transport as continuous tonne-km rather than whole trips.
What to try
- Pick Aluminium, long haul by ship and then switch the mode to lorry: the break-even distance on the readout and the first graph drops by an order of magnitude.
- Raise the haul distance until the net saving crosses zero and compare it with the yellow break-even marker.
- Choose Reuse-first city and watch the green flow to the reuse shop thicken while the landfill mound stops growing.
- Set the collection rate to 0 and see the smoke from the factory stay at its maximum.
- Open the Recycling plant camera to follow recovered material back to the factory.