Live readouts
Chamber overpressure over time
The science
Magma collects in a chamber about 6 km down (the block shows a 28 km wide slab of crust, with one quarter cut away; the vertical scale is real, 1 unit = 1 km). Fresh magma pushes the walls outward, so the chamber overpressure rises almost linearly with the injected volume. When it exceeds the tensile strength of the roof rock a conduit opens and the pressure difference drives magma upward. Dissolved water comes out of solution as the pressure drops, the bubbles grow, and at about 75 % gas by volume the foam fragments into ash: that is what makes an eruption explosive.
Honest simplifications. One lumped, elastic chamber; magma-static and lithostatic pressure are treated as equal; one volatile (water) with a square-root solubility law fitted for rhyolitic melt; all gas stays coupled to the melt (no open-system degassing, which is why a very runny melt is classified as effusive by a viscosity rule). No conduit erosion, crystallisation, heat loss or wall-rock stresses. The conduit is drawn about 10 times wider than its slider radius so that it can be seen. The 3D chamber geometry is fixed at 6 km depth (the 2D page has a depth slider). Particle motion is a visual model: bombs fly ballistically in real units shown 4 times faster, the ash column climbs at a display speed up to at most 22 km (the plume height number uses Mastin et al. 2009, H = 2 V0.241, and is order-of-magnitude). The clock is accelerated and slows down during eruptions.