Setting up the colour lab…
🎨 Colour mixing lab
💡 Additive mixing (light)
🎨 Subtractive mixing (paint)
Centre (light): #ffffff — White
Centre (paint): #000000 — Black
The science

Additive (light). Light adds: every projector contributes its own radiance, so the screen shows (R,G,B) = Σi wi(x)·ki, where wi is the soft-edged beam footprint (1 inside, 0 outside) and ki the slider drive of that primary. Red + green = yellow, red + blue = magenta, green + blue = cyan, all three = white — the three cone types of the eye are then excited in the same ratio as by daylight. Sums above 1 simply clip, as on a real display.

Subtractive (paint). A pigment layer removes part of each channel, so layers multiply the transmitted light: T = Πi (1 − wi·ai·(1 − basei)). Cyan absorbs red, magenta absorbs green, yellow absorbs blue; C+M = blue, C+Y = green, M+Y = red, all three at 100 % = black. The sliders are the pigment amount ai in [0,1].

Honest simplifications. The product rule is applied to the displayed (sRGB-coded) channel values, not to full reflectance spectra; real paints mix by Kubelka–Munk scattering/absorption, so real cyan + yellow gives a muted green and the three together a dark brown rather than pure black. Beam footprints are drawn analytically (a shader) so that the arithmetic stays exact; the projectors, easel, jars and stage are Blender-modelled, but the beam cones and dust motes are decoration.

Independent checks (framebuffer pixels read back from the GPU and compared with closed forms):

running…
Drag: orbit · Wheel / pinch: zoom · Move the sliders to change the overlaps
Made with ๐ŸŸ  Blender ยท Three.js