loading...
running...
The science
What a tidal bore is. In a shallow, funnel-shaped estuary the incoming tide steepens: the crest travels faster than the trough because long-wave speed is c = √(g h) and the depth under the crest is larger. If the tidal range is a large fraction of the depth and friction does not drain the wave, the front becomes a moving hydraulic jump: a bore running up the river against the current (Severn, Qiantang, Amazon pororoca, Bay of Fundy).
Governing equations. The page solves the one-dimensional shallow-water equations for depth h and unit-width flux q = hu in a channel of width b(x) that narrows towards the head:
∂h/∂t + ∂q/∂x = -(b'/b) q, ∂q/∂t + ∂(q2/h + g h2/2)/∂x = -(b'/b) q2/h - g n2 q|q| / h7/3
with b(x) = bmouth exp(-(L - x)/Lb), Manning friction n, a prescribed tidal level h = H0 + A sin(2πt/T) at the mouth and a prescribed river discharge at the head. The numerical method is a finite-volume HLL scheme with MUSCL (minmod) reconstruction and a two-stage Runge-Kutta step; it captures the jump as a shock without any special treatment.
Jump relations. Across a bore of depth ratio r = h2/h1 (h1 ahead of it, towards the head), conservation of mass and momentum in the frame of the bore give
F1 = (c + U1)/√(g h1) = √( r (r + 1) / 2 ), (c + U1) h1 = (c + U2) h2, head loss = (h2 - h1)3 / (4 h1 h2)
so the bore speed over the ground is c = F1√(g h1) - U1: a stronger river flow U1 slows it. Observed bores are classified by F1: undular (F1 < 1.3, a train of waves behind the front), weakly breaking (1.3 to 1.7) and breaking (above 1.7). The page marks the steepest front in the solution, reads h1, h2, U1 from the cells either side and compares the speed from these relations with the speed of the front tracked in time (graph two).
Checks (run in the page). (1) still water in a converging channel stays still; (2) the closed-channel volume is conserved to rounding; (3) a bore with r = 1.5 started as a Riemann problem moves at the jump-relation speed to within 5 percent; (4) momentum flux balances across the jump; (5) the energy lost equals (h2 - h1)3/(4 h1 h2).
Simplifications. The bed is flat and the cross-section rectangular, with the width shrinking exponentially (real estuaries shoal as well, which is what makes real bores form at moderate friction; the default roughness is therefore lower than a typical sandy estuary). The model is hydrostatic, so the undular waves behind a weak bore are not resolved; the 3D page adds them as a visual overlay only. Turbulence, sediment, banks that flood and dry, wind and Coriolis are left out. Speeds above 1500 times are for exploration.