Raised bog cross-section: peat growth, water table and carbon balance

A Blender-built bog block whose peat layers, pools and carbon fluxes follow the two-pool peat model; drainage at year 4000 can flip it from sink to source.

Switch to 2D

Presets

Playback

Productivity, water table and climate

Camera

Layers

Quality

Model check

The science

What you are looking at

A 16 m x 16 m cut-out of a raised bog, drawn at true vertical scale. Under the living moss lies the acrotelm (fresh litter, a few centimetres of carbon-poor layer in the model), then the catotelm (old, waterlogged peat), then mineral subsoil. The surface hummocks, hollows, pools, bog pines and cotton-grass are Blender assets; the peat thickness, the water table and the carbon fluxes are the 2D page's model, replayed over 6000 years (500 years per second). Drainage at year 4000 deepens the water table to the second slider value and a ditch appears.

Model

Two pools in kg C m-2: dMa/dt = NPP − (ka + kt)Ma for the oxic acrotelm and dMc/dt = ktMa − kcMc − ks·min(Mc, ρw) for the catotelm. Decay rates scale with temperature as Q10 = 2 and the acrotelm rate is damped by a high water table. The last term is slow aerobic oxidation of old peat that lies above the water table (carbon density ρ = 50 kg C m-3, so peat depth = carbon / 50). Methane is φ·e-w/15 cm·kcMc; the climate effect counts CO2 (44/12 per kg C) plus CH4 at GWP100 = 28. The equations and numbers are copied verbatim from the 2D page's engine.

Reading the 3D scene

Layer heights are the model: catotelm height = Mc/50 m, acrotelm height = Ma/50 m. The blue band on the cut face is the saturated zone below the water table; pools are water standing where the relief is below the water table, so they dry out when the water table is lowered. Green particles falling in (CO2 uptake, proportional to NPP), orange particles rising (respiration) and yellow bubbles (methane) have counts proportional to the fluxes; the particle sizes and speeds are not to scale. The surface turns brown as the water table drops. Trees and cotton-grass are decoration and do not change with the model.

Honest simplifications

Rounded literature-scale parameters, not fitted to a site; no vegetation succession, fire, dissolved organic carbon export, freezing or hydrological feedback, no lateral flow, no peat subsidence after drainage. The raised-dome shape of a real bog is not modelled; the block shows a vertical column of peat.

Checks on this page

(1) Four closed-form checks of the model (RK4 step halving, closed-form acrotelm, analytic catotelm fixed point, carbon balance). (2) Bounding boxes of the rendered layer meshes at three times equal the model thicknesses and the pool-water plane sits at the water-table depth. (3) The share of the Blender relief lying below the water table decreases monotonically to zero as the water table deepens.

Loading model...
Loading Blender model...
Stored peat carbon over 6000 years
Net carbon balance and climate effect
Peat depth and water-table depth
Steady-state peat depth vs water table
Made with 🟠 Blender · Three.js