Two construction phases, stepped stonework and foundation loads — an interactive reconstruction of a Kushite royal monument.
The enlarged pyramid’s documented base is 51.75 m per side. Published sources offer an uncertain 40–50 m height range, while the outer face is reported at roughly 69°. This laboratory deliberately models the lower 50 m of a 69°-sided frustum: a hypothetical truncated envelope, not a claimed historical summit.
At elevation y the side length is side(y) = B − ky, where k = 2/tan(69°). Assembled volume to height h is V = B²h − Bkh² + k²h³/3. Independently, 90 course-frustums are added using ΔV = Δh(A₁ + √(A₁A₂) + A₂)/3.
Mass is m = ρV(1 − void fraction), weight is F = mg, with g = 9.80665 m/s², and average support pressure is p = F / (B² × support fraction). The contact fraction and void fraction are hypothetical experiments, not measured site conditions.
Documented: Taharqa’s tomb at Nuri, the enlarged 51.75-metre square base, earlier 28.5-metre core, substantial later expansion, stepped outer courses, the approximately 69° outer-face description, and underground rock-cut chambers.
Scholarly reconstruction: a two-phase superstructure and a visibly separated outer masonry sequence. The displayed 50-metre truncation is an explicit sensitivity scenario because original height estimates differ.
Artistic interpretation: equal-height course divisions, inner-stage outline height, individual joints, terrain relief, weathering and the schematic below-ground chamber marker. Neither the masonry geometry nor the section substitutes for an archaeological survey.
Ground pressure is only a bulk mean; it excludes bedrock stress distribution, stone-to-stone contact, settlement and foundation mechanics.
Educational reconstruction; details marked as reconstruction are interpretive.