Equations used
Dynamic wind pressure: q = ½ρv², using ρ = 1.225 kg/m³ for textbook sea-level air density.
Resultant lateral force: F = qCᵈA, with Cᵈ = 1.2 and projected area A = H(D₀ + D₁)/2.
Base overturning moment: M = qCᵈH²(D₀ + 2D₁)/6 for a linearly tapered circular profile, where H = 65 m, D₀ = 9 m and D₁ = 3 m.
Independent numerical check
The page integrates qCᵈD(z)z over 100 horizontal strips and compares the result with the analytical moment formula. The top diameter and drag coefficient are illustrative assumptions.
What is simplified
The model assumes steady horizontal wind, a constant drag coefficient, a linear diameter taper, uniform air density and a rigid base. It does not calculate gust response, vortex shedding, masonry cracking, internal stair mass, soil-structure interaction, seismic response, riverbank erosion or structural safety.
Documented, reconstructed and interpreted
- Documented: approximately 65 m height, 9 m octagonal base, four tapering fired-brick shafts, geometric relief, turquoise Kufic inscription and a double spiral stair.
- Scholarly reconstruction: the continuous section, internal stair geometry and simplified construction sequence.
- Artistic interpretation: exact shaft transition heights, top diameter, brick dimensions, surface wear, valley terrain, weather and lighting.
Educational reconstruction; details marked as reconstruction are interpretive.
Sources
- UNESCO World Heritage Centre — Minaret and Archaeological Remains of Jam
- UNESCO — Minaret and Archaeological Remains of Jam, Nomination File 211rev
- ICOMOS — World Heritage List Evaluations, 2002
- Encyclopaedia Iranica — Jām ii. Jām Minaret
- Seismic Hazard Assessment of the Historical Site of Jam in Afghanistan and Stability Analysis of the Minaret
- Stability and Seismic Analyses of Leaning Towers: The Case of the Minaret in Jam
- UNESCO — Safeguarding the Minaret and Archaeological Remains of Jam
- French Ministry of Culture — Jam
Published dates and dimensions vary slightly between accounts. The tower profile and top diameter in this model are interpretive, not a conservation survey.