A slender column loaded in pure compression does not crush — it buckles sideways, sharply and often suddenly, well below the material's crushing strength. The load at which this instability begins is Euler's critical load:
P_cr = π² E I / (K L)²
λ = K L / r (slenderness ratio, r = √(I / A))
δ = δ₀ / (1 − P / P_cr) (Southwell amplification of a small initial crookedness δ₀)
E is the material's stiffness, I the cross-section's second moment of area, L the column's physical length, and K the effective-length factor set by how the ends are held: pinned–pinned (K=1), fixed–free / cantilever (K=2), fixed–fixed (K=0.5), fixed–pinned (K≈0.699). A stockier, shorter, more rigidly-held column buckles at a far higher load than a slender, long, weakly-held one of the same material.
- Material / section / length — set E, I = b⁴/12 and A = b² for a solid square section, which fixes Pcr.
- End condition — changes K and therefore the effective length KL and the buckled mode shape drawn on the column.
- Load slider — sets P as a fraction of the current Pcr. Every real column has a tiny initial crookedness δ₀ ≈ L/500; the Southwell formula shows why deflection grows gently at low load and then explodes as P approaches Pcr — the column is stable everywhere except in the limit P → Pcr, where any small imperfection is amplified without bound.
Real-world relevance: this exact formula sizes every steel column, bracing strut and scaffold pole in a building — a member is chosen not just strong enough to avoid crushing, but stiff and short enough that Pcr sits safely above the load it will ever see (typically with a safety factor of 2–3).