Triaxial Soil Test - 3D Lab

Squeeze a soil specimen in a pressurised cell and watch the Mohr circle grow until it touches the failure envelope.

Switch to 2D

Presets

Playback

Soil

Strength and stiffness of the specimen.

Test conditions

Drainage

Drained: water can leave, volume changes. Undrained: valve shut, pore pressure changes.

Speed

Camera

Layers

Quality

Model checks

The science

What the test measures

A cylindrical soil specimen in a rubber membrane sits in a water-filled cell. The cell pressure gives a constant confining stress sigma3; a ram then squeezes the specimen axially until it fails. The deviator stress is q = sigma1 - sigma3 and the axial strain is e1 = dH/H0.

Mohr-Coulomb strength

Failure happens when the Mohr circle of effective stress touches tau_f = c + sigma' tan(phi). For a circle that is tangent to the line: (s1' - s3')/2 = c cos(phi) + (s1' + s3')/2 sin(phi), so the drained peak is q_f = 2(c cos(phi) + s3' sin(phi)) / (1 - sin(phi)). The failure plane makes 45 deg + phi/2 with the plane on which sigma1 acts (horizontal here).

Drained volume change (Rowe stress-dilatancy)

s1'/s3' = K (1 - dev/de1) with K = (1 + sin(phi_cv))/(1 - sin(phi_cv)). Dense sand has a peak ratio larger than K, so it dilates (ev falls); loose sand stays below K and contracts. At the critical state the volume rate is zero and the strength falls to phi_cv.

Undrained pore pressure (Skempton)

With drainage shut the volume is constant and du = B[ds3 + A (ds1 - ds3)], B = 1 for saturated soil. Effective stresses follow from s3' = s3 - du. Substituting the failure condition gives q_f = 2(c cos(phi) + s3' sin(phi)) / (1 - sin(phi) + 2 A_f sin(phi)). Loose soil has A_f > 0 (positive pore pressure, weak); dense soil A_f < 0 (suction, strong).

Three-specimen suite

Tests at 0.5, 1 and 2 times your sigma3 give three failure points. In the stress-path plane p' = (s1' + 2 s3')/3, q they lie on q = a + M p' with sin(phi) = 3M/(6 + M) and c = a (3 - sin(phi)) / (6 cos(phi)). This is how a real laboratory reports phi and c.

Honest simplifications

The stress-strain curve is an empirical shape (smooth hardening to a peak at your chosen strain, then Gaussian-type softening) tuned to hit the exact Mohr-Coulomb strengths; real curves depend on density, stress history, fabric and rate. The specimen is assumed homogeneous until failure; the visible shear plane and bulging are a kinematic illustration, not a finite-element solution. Skempton A is held as an input; a cavitation limit keeps the undrained strength finite for very dense soil. Water-pressure units are kPa; one atmosphere is about 101 kPa.

What to try

1) Run the dense and the loose sand with the same sigma3 and compare peak and volume change. 2) Switch to undrained and watch du rise for loose sand and drop for dense sand. 3) Raise cohesion and see the envelope intercept. 4) Compare the fitted envelope (white dashed) with the input line (red).

Loading model...
Loading Blender model...
Deviator stress vs axial strain
Volume strain / pore pressure vs strain
Mohr circles and failure envelope
Stress path p' - q and Kf line
Made with 🟠 Blender · Three.js