Drag up/down on the river (left) or the landward side (right) to change the water level.
3D barrier version →

🌊 Flood barrier controls

Loads on the five leaves

Leaf angle from vertical-
Wetted height on the leaf-
Net horizontal force (5 leaves)-
Vertical part (water wedge)-
Hinge moment (this model)-
Old vertical-wall law-
Ram lever arm-
Ram force per leaf-
Hinge moment (kN·m, 5 leaves) vs leaf lean (0 to 72 deg) at these levels: this modelold law
Ram force per leaf (kN) vs leaf lean; the dot is you.
The science

A leaf of length L = 4.5 m and width W = 4.74 m is hinged on the sill and leans landward by θ from the vertical. Still water gives pressure p = ρg(h − z). Integrating along the leaf (wetted length s = h/cosθ):

N = ρgW(h s − s² cosθ / 2), M = ρgW(h s²/2 − s³ cosθ / 3) = ρgW h³ / (6 cos²θ) about the hinge.

The horizontal part of N is exactly ρgW h²/2 (the projection theorem) and the vertical part is the weight of the water wedge above the leaf, so a leaning leaf feels the same push but a longer lever: the moment grows as 1/cos²θ. With landward water the two sides subtract face by face (net horizontal ½ρgW(hr² − hl²), not ½ρgW(hr − hl)²).

The ram force follows from moment balance about the hinge, F = M / arm, where the lever arm comes from the cross product of the hinge-to-attachment vector and the ram direction (it equals |dL/dθ| by virtual work).

Simplifications. Still fresh water; rigid impervious leaf; no waves, seepage, uplift, ice or soil; the ram carries the whole moment; overtopping is treated as pressure only (no weir flow). Levels are measured from the hinge line. Dimensions are illustrative, not a design method.

Checks that run on load (independent of the formulas above):

Made with 🟠 Blender